How to replace rangehood filter?

[Joker2021]

Hi Everyone

I recently brought an apartment and moved in last week. I need to replace the grease filter for the rangehood and it appears damaged. Looks like the tenant didn't take care of it very well.

I cannot tell which model it is but I am guessing its a simpson model  and an old rangehood since that is the brand the stove is.

Just want to check if any filter crease replacement (approx 55 cm x 30 cm) will fit so do I need to find one that is specific to the manufactures?

I have uploaded some photos as well. 

Thanks in advance.

[Tom3486]

Thanks Jacob,

this is a photo of my filter - it measures roughly 54x34cm. It’s a much older style and size. I think even the manufacturer has folded! 

I’ve been able to open it up and can see it is filled with something that looks like steel wool mesh or similar. Is that something I could use in being experimental as you say?

 

[JacobZ]

Hi @Tom3486,

You could replace the material with some of this Cut To Size Filtamat.

Let me know what you think.

Jacob

[Tom3486]

Thanks Jacob! I will give it a go!

[Joker2021]

Hi @Tom3486 and @JacobZ 

Firstly, very sorry for replying so late. Work and personal life has been crazy busy.

I actually managed to locate the model number and got a replacement filter (see below link)

0144002129 For GENUINE CHEF, SIMPSON, WESTINGHOUSE RANGEHOOD FILTER 553X316X9MM

https://www.ebay.com.au/itm/256427375007?_skw=0144002129&itmmeta=01JR187C8Y1X7GJW1F540RGAAG&hash=ite...

Not sure if that helps your situation @Tom3486.

[emilia1234]

Hi 

I was wondering how you managed to remove this filter, as I have recently moved into a new place and believe I have the same range hood model in similar condition.

I can't find any tabs or other removal mechanisms, so any advice would be appreciated. Thanks!

[EricL]

Hello @emilia1234 

Welcome to the Bunnings Workshop community. It's sensational to have you join us.

Let me tag @Tom3486 to make them aware of your query. Having had a second look at Tom's rangehood, it appears that the two black screws at the very end are the ones holding the filter cover in place, I propose doing a bit of an investigation while we wait for Tom's confirmation of the method of removal.

If you need further assistance, please let us know.

Eric