How to repair cracked cornice?

[margiemh]

Hi, I repaired cracked cornice, now it looks worse.  I cannot find that same profile size which is 65mm. So I would like to try again to repair, now I am wondering if there is a tool out there that can be used to fit that cornice curved profile if I put some sort of plaster there?

[JacobZ]

Hi @margiemh,

Thank you for your question and welcome to the Bunnings Workshop community, it is fantastic to have you with us.

Is it possible to get some closer photos of the issue you are having? 

It looks like the top edge may have some slight cracking, but it's very difficult to see the issue from the photos you have provided. If this is the case, you might like to check out How to repair a cracked cornice for a step-by-step guide on how to fix this issue.

Is it also possible to get a photo with a tape measure against the cornice for scale? 

I have found that cornice is very difficult to measure as the measurement refers to the radius of the cornice as opposed to the measurement across the curved section. I note that there are options for 55mm and 75mm Cove Cornice from CSR. One of these may actually be closer to the size of your cornice than you suspect. If they do turn out to be a close profile, they can be ordered through your local store's Special Orders desk.

Also, allow me to tag some of our helpful members to see if they have any advice to offer, @Dave-1, @Noyade, @Jewelleryrescue, @Nailbag.

Let me know how you go with those additional images and if you have any further questions, please don't hesitate to ask.

Jacob

[Nailbag · Accepted solution]

Hi @margiemh 

as @JacobZ mentioned we would need a few more clear photos far and close as I can't tell where the issue is.

To know if it's 55mm or 75mm cornice, just measure its height as per image below.

Nailbag 

[margiemh]

Many thanks Nailbag, I've got it now, I did measure incorrectly, I went along the curve!  So I'm all good now, I will remove that one cracked cornice and replace with a new one.  I won't be sending any other photos, as I will not attempt to repair, now that I know I can replace.

Thank you once again.

[Nailbag]

Nice one @margiemh glad we were of help.

Nailbag

[margiemh]

Many thanks Jacob for your quick response.

Cheers,

Margie