When the fencers installed our fence, they left big chunks of cement on our driveway. Just wondering if anyone had any ideas of how to get it off with the driveway also being cement?
The attached image is one of the smaller sections left behind. (Hard to see in the image, but each of the sections is quite raised, so even just painting over wouldn’t solve the issue.)
When was the fence done @ihavenews0cks? It's always best to try and remove cement as soon as possible and preferably before it has fully hardened.
If it was spilled there within the last day, I'd recommend starting with a stiff bristle scrubbing brush and hot soapy water. Alternatively, try a high pressure washer. Failing that, you'd need to resort to either Chemtech 1L Brick Tile And Paver Cleaner or Bondall 1L Hydrochloric Acid. With either of these products, ensure you wear appropriate PPE including a respirator, safety eyewear, and long sleeve pants and shirt.
The issue with using the above two products is that if they do work, they're likely to clean the cement underneath and leave patches. You might need to give the whole surface a good clean down to blend it in.
Please let me know if you have any questions.
It’s over a year old. Only recently have we gotten to the more intricate jobs around the new build.
if the suggestions from the guys doesn't remove the problem,then i would grab an angle grinder and use a grinding disc.may sound extreme ,but with a bit of care you will be able to level the surface and then perhaps with a wire brush on the angle grinderyou maybe able to then blend the surface into te surrounding surface,