Share
Hello @diydna
Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your retaining wall.
Timber retaining walls, being constructed from a natural material, are subject to moisture absorption and evaporation as part of their normal environmental exposure. When these walls are clad directly with a cementitious substrate, the covering can inhibit adequate ventilation, thereby trapping moisture within the timber. This condition accelerates the degradation of the retaining wall through rot, mould, or fungal activity, significantly reducing its structural lifespan.
To mitigate this issue, a common and effective approach is to construct a ventilated cavity between the timber structure and any cladding material. This can be achieved by installing a timber batten frame over the retaining wall, which creates a continuous air gap behind the cement sheet. This gap allows moisture to dissipate naturally, preventing prolonged damp conditions that contribute to timber failure.
As an alternative to a cementitious cladding system, I propose using pre-assembled Merbau decking panels as a capping solution for the top of the retaining wall. When installed with a consistent 5mm spacing between boards, the design facilitates ample airflow around the timber, allowing for effective ventilation while also offering a durable and visually appealing finish. Merbau’s natural resistance to decay and dimensional stability in outdoor conditions make it a suitable material for this application.
This approach balances durability with breathability and avoids the pitfalls of moisture entrapment, thereby supporting the long-term performance and appearance of the retaining wall.
If you have any other questions we can help with, please let us know.
Eric
