Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Laundry transformation

ProjectPete
Trusted Contributor
ProjectPete
ProjectPete
Trusted Contributor

Updating your laundry with new fittings and extra storage can make the space more functional and attractive. This dramatic renovation included removal of the old laundry tub, a new splashback, lovely large timber benchtop using Tasmanian Oak project panels and overhead cabinets. 

 

 

Finished.jpg

 

The project

 

To kick things off I obviously started with a design courtesy of Leah (Mrs ProjectPete) and regardless of how simple or difficult it was, it had to be done – time to rip out boring old stuff.

 

Once it was all out, I got started on repainting the walls and repositioning the powerpoints so it would be hidden under the new benchtop and wouldn't interfere with the new wall-to-wall splashback.

 

We marked out the position of overhead cabinetry we planned to install so we didn't have to waste time and money painting unnecessary areas of the wall that would be covered anyway.

 

ppointchannel2.jpg

 

Installing the power points was a simple case of marking out where the benchtop would be, channelling the wall to the new position and filling the channel. I first installed the back and sides of the centre cabinet to get a level for the benchtop position, and then channelled the wall with an angle grinder. It gets super dusty, so cover up surrounding areas and vacuum straight away. To make repositioning the cables easier and the refilling smoother, you can use PVC or flexible gas piping. Refilling the bulk of the channel with cement, I finished it with a smooth Spakfilla, sanding it back to finish flush and smooth with the wall.

 

While measuring out the new benchtop, I also measured out the cutouts for the new sink. I then sanded and stained the benchtop, sanding after the first and second coats. I applied three coats of a Feast Watson product to finish and protect my timber benchtop, and it's still in great condition five years on from the initial install. Ensure every square inch of the wood is stained and sealed, including where you make cuts. This is to prevent the wood warping, especially in a moisture-rich room such as a laundry.

 

With the benchtop ready for install, it was slotted in and fixed to the brackets.

 

benchtopin.jpg

 

This video on Workshop from Bunnings was all I needed to install my first splashback. With the subway tile splashback completed, it was then time to install the overhead cabinets and the doors on the bottom centre cabinet, and then get the sink and plumbing finished.

 

sback1.jpg

 

The last thing to do was to fill the join, and then give the benchtop a final sand and coat. I hid the join in the two benchtops as best I could by putting it right in the middle of the benchtop so the sink would cover most of the join. Given the small amount of space to make the join, and to achieve the strength I needed, I used 12.5mm dowel joins. Given the benchtop is in a moisture-affected room with a lot of condensation, it's a good idea to leave a gap for expansion – 5mm is sufficient. Your wall tiling will cover the gap.

 

The timber used in this build was a couple of Tasmanian Oak project panels from Bunnings. I cut the lengths with my new Bosch Circular Saw. The benchtop is a Victorian Ash laminated project panel – readily available from Bunnings and great value. First pass with a sander is key, get it done with some power. Then it’s just a light hand sand between coats. The sink cutout was a straight forward job with my Ryobi jigsaw.

 

If I were to design this laundry from scratch, I'd have the washer and dryer side by side for ease of use, but for this renovation it came down to simplicity and cost given the plumbing and sink was already in the middle from the original build. There was no issue with the sliding door when renovating our laundry as I ended the benchtop on the outside of the 'frame' (brick wall) instead of cutting the wood to fit into the sliding door recess.

 

The bottom line – have a vision, plan for it, be ready to adapt and just go for it. There were some ‘firsts’ for me in this project and I’m super stoked with how well it all turned out.

 

Before and after

 

splashbackremoved1.jpg

 

final1.jpg

 

Tips for installing a tiled splashback

 

  • Protect the benchtop – the fourth and final coat is done once the splashback is up and the overhead cabinets installed.

 

  • Instead of smearing grout all over the tiles, pushing into the gaps and then cleaning, focus your application of grout to the gaps, push and smooth them – a lot less clean up.

 

  • Get that first row right. As long as it’s straight and level, the rest will flow nicely.

 

  • For small subway tiles like mine, use an angle grinder and a steady hand to cut to size. Don’t bother with a tile cutter.

 

Workshop member MikeTNZ added that being able to cut tile using an angle grinder to a line made with a fine pen is a great D.I.Y. skill and is far better than using a tile cutter. "Beginners should start with a 4" (100mm) grinder and a 2mm thick cut-off disc – these are easy enough to control with one hand."

 

For a step-by-step guide, visit How to tile a splashback

 

Popular laundry renovation projects

 

Completed in just a day for a wallet-friendly budget of $500, Workshop member Jess transformed a basic laundry with a standard trough and no storage by installing a new sink, cupboards, tiles and benchtop.

 

prettyliving laundry.jpeg

 

Starting out with a basic trough in a European style laundry, Workshop member Rufaro transformed this space with overhead cupboards, a marble benchtop and new sink.

 

chaks laundry.jpeg 

 

Bunnings Workshop member abhayks replaced the flooring, tiles, benchtop, sink and cupboards in a D.I.Y. laundry renovation that saved them more than $6,000.

 

abhayks laundry.jpeg

 

Get more ideas for your laundry makeover from our Top 10 most popular laundry renovation projects.   

Comments
daisym
Budding Contributor

Hi @ProjectPete 

 

I was looking at your Laundry transformation and loved your timber benchtop and was just wondering if you could please confirm what product you used??? 

 

Thank you so much 

MitchellMc
Bunnings Team Member
Bunnings Team Member

Hi @daisym,

 

Hopefully, @ProjectPete can confirm what timber he used. From his discussion post, I couldn't quite work out whether it was Tasmanian Oak or Victorian Ash laminated project panels that he used. I haven't been able to track those down, but the benchtop looks almost identical to the 2200 x 600 x 26mm Beech Laminated Panel I used in my own laundry.

 

Mitchell

 

daisym
Budding Contributor

Hi @MitchellMc 

 

Yes, l could find the Tasmania Oak Project Panel either, thats why l just wanted to check. 

Did you use the Beech Laminated for shelving as well or just the benchtop 

 

Thank you 

EricL
Bunnings Team Member
Bunnings Team Member

Hello @daisym

 

Let me tag @MitchellMc to make sure he's made aware of your question. I remember these panels mentioned coming in as promotional items. They were non standard sized panels but were long enough to be used for small laundry rooms. The only panels currently available are:

 

 

Using the Beech Laminated Panel would be your best option as it allows you to stain it in a colour that you like.

 

If you need further assistance, please let us know. 

 

Eric

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects