Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Low level deck

Harv
Building a Reputation

Low level deck

Lowleveldeck.jpg

I am building a low level deck and I’m restricted with height.

 

I’m using 140x45 H3 treated pine bearers.

 

I put my posts in at 1.8mt spacings. The deck is 7m x3.6m with flush joists and centre bearer. Now I’m not sure if my stumps are too far apart for that size timber.

 

BIM_Engineer
Former Community Member

Re: Low level Deck

@Harv
Bearers as shown bolted or nailed together
Joists can be flush with bearers using Joist Straps
Harv
Building a Reputation

Re: Low level Deck

My bearers are only single beam I need to double them looking at your drawing 

Thanks again for your help 

Adam_W
Workshop Legend

Re: Low level Deck

Hey @Harv,
You mentioned a couple of times that it's close to the ground. What sort of clearance do you have?
I just ask as you need to be mindful of termites & rot even with treated timbers.

Gezza87
Cultivating a Following

Re: Low level Deck

I'm looking at a similar size deck what should be used for stumps? TIA
Harv
Building a Reputation

Re: Low level Deck

Only 50mm in one spot that's been my problem all long I should of excavated it before I started 

Harv
Building a Reputation

Re: Low level Deck

I used gal stirips because timber there was no enough height for timber stumps 

Jason
Community Manager
Community Manager

Re: Low level Deck

@Gezza87,

 

In the Bunnings series of D.I.Y. advice videos about how to build a deck, they use concrete stumps. You'll be most interested in the section on how to install bearers and stumps. I will embed the video below. Hope its helpful to you.

 

Jason

 

 

See something interesting? Give it the thumbs up!
raymao268
Cultivating a Following

Re: Low level Deck

Thanks for sharing this plan, a friend of mine is also planning a deck, he can totally use this plan.

Harv
Building a Reputation

Re: Low level Deck

One last question my bearers are single 140x45 looking at the drawings I need to double them up USING 2 together I'm taking it one by itself is not strong enough for the 1.8.mt span 

Thanks again so much 

BIM_Engineer
Former Community Member

Re: Low level Deck

@Harv
Quick Eplanation  HTH

Engineering Decking1.jpg
@raymao268
Your welcome, Actually its a 3D BIM Model

I also have It linked to Google sheets, my Planning schedule, Labour Rate/Times  and Bunnings Price list Databases

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects