Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Should an inspection pipe have water in it?

dzg
Cultivating a Following

Should an inspection pipe have water in it?

hi, apologies if this was covered in a separate question (i confirmed my downpipe nearby is not blocked), but hoping to get guidance on whether there being visible water in this inspection pipe is a concern?

IMG_8640.jpg IMG_8643.jpg i

thanks

 

JacobZ
Bunnings Team Member
Bunnings Team Member

Re: Inspection pipe has water in it - problem?

Hi @dzg,

 

Thank you for your question.

 

In many cases, a small amount of standing water is completely normal, especially after rain or in systems that are designed with traps to block odours. 

 

If the water level in your inspection pipe remains low and doesn’t rise over time, and if you’re not experiencing any overflow or slow drainage from nearby pipes, then there’s usually nothing to worry about. Residual water can linger for days after rainfall or after water has passed through the system, depending on the slope and layout of the pipes.

 

However, if the water level stays high even after several dry days, rises during rain, or if you notice gurgling sounds, odours, or sediment in the water, this could indicate a partial blockage or poor drainage further along the line.

 

To check whether there’s an issue, you could use a tape measure to make note of the current water level inside the pipe and recheck it after a couple of dry days. If it hasn’t dropped, there might be a restriction or blockage that needs further investigation from a plumber.

 

Let me know if you have further questions.

 

Jacob

 

dzg
Cultivating a Following

Re: Inspection pipe has water in it - problem?

thanks Jacob, will go with your advice

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects