I am planning to build (or have someone from Airtasker build) a this Rapid Fence gate. I went to look at it at my local Bunnings, with the intent to b ...
Hello .wanting advice on best choice of product ,to fill old soft sandy motar.bolt holes that require reanchoring of new bolts ,for a metal outdoor ga ...
Hi. Not sure how to fix this- I have read other posts that say remove as much rust as possible, use a rust converter and then use turbo metal builders ...
Hi All,Going to be undertaking some works at home including the building of an alfresco area, pergola and concreting a near carport/park area next to ...
Good evening,
Between the gate and gate post on the latch side of my front fence gate i have an uneven gap.At the top is 10mm and it gets progressive ...
I was looking to mount a gate fence and wondering whether it is possible to mount the gate hinge straight onto the existing fence post?
Gate: Propos ...
HI, just wondering if anyone has any suggestions on how to seal around the flyscreen. I have just replaced the screen however, there is alot of movem ...
External doors were looking old and tired. Plus they were damaged round the bottom on one of the three doors. Instead of replacing I decided to repair ...