Hello @tfd
While this timber is already H4 treated so suitable for in-ground use, I like to add an additional layer by painting it with bitumen pai ...
Hi @AshleyLauren
My table was in similar condition, perhaps not as bad, but after sanding it down with 80 grit on an orbital sander, then 120 grit, ...
Hi @rhi8084 just to add that 800x2000 is not a standard size, the closest to that size is 820x2040 and can usually only be trimmed down by 3mm on eac ...
@Noyade are you wanting to hold the door open or can you get away with making it close more slowly? I believe most pneumatic door closers are adjustab ...
Hi @JohnsonZ there should be a sticker on the side of the door noting how much can be trimmed off, the below was on an internal door I recently fitted ...
@almo have you thought about mounting your flyscreen on the inside? You may need to add a port or work out a way around the lever but the louvres don' ...
Hi @Shazzy-Lee
I used these magnetic flyscreens in one of my caravans (available in XL as well). The adhesive backing magnet doesn't stick well at al ...
Thanks for the suggestion. I had thought of doing them on the inside but couldn’t figure out a way of accessing the lever to open & close. I’ll have a ...
What a wonderful transformation you have achieved in this space, @twocutekelpies! The change from the original sixties layout to the fresh, modern bat ...
On an older project I had a Table Saw and a Router Table on a shelf unit that I put wheels on to move around in my workshop.
I needed more bench sp ...
Hello @tfd
While this timber is already H4 treated so suitable for in-ground use, I like to add an additional layer by painting it with bitumen pai ...
Hi @AshleyLauren
My table was in similar condition, perhaps not as bad, but after sanding it down with 80 grit on an orbital sander, then 120 grit, ...
Hi @rhi8084 just to add that 800x2000 is not a standard size, the closest to that size is 820x2040 and can usually only be trimmed down by 3mm on eac ...
@Noyade are you wanting to hold the door open or can you get away with making it close more slowly? I believe most pneumatic door closers are adjustab ...
Hi @JohnsonZ there should be a sticker on the side of the door noting how much can be trimmed off, the below was on an internal door I recently fitted ...
@almo have you thought about mounting your flyscreen on the inside? You may need to add a port or work out a way around the lever but the louvres don' ...
Hi @Shazzy-Lee
I used these magnetic flyscreens in one of my caravans (available in XL as well). The adhesive backing magnet doesn't stick well at al ...
