Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to add an extension to a Colorbond fence

ProjectPete
Kind of a Big Deal

Difficulty: Intermediate

A fence extension can add welcome privacy for your outdoor spaces, as well as enhanced security for your property.

 

While the standard install height for Colorbond fencing is 1800mm, for a small investment you can add privacy and security to your boundary fencing with D.I.Y. extensions taking the finished height to 2100mm.

 

As with any changes to a shared boundary, remember to talk to you neighbour before starting work. It’s the right thing to do and they might even agree to share the cost. It is also wise to contact your local council.  

Steps

Step 1

Measure your existing fencing to determine your material list. Simply count the number of sheets, uprights and rails that you have. That will be the quantity of each of the items needed in the extension kit. To calculate how many plate brackets, just count how many uprights you have, halve it, and add one (for the end).

 

Note that some sections (from upright to upright) will be shorter or longer than the rest, so be sure to measure the rails and order the lengths required. Keep in mind you may need to cut some to fit.

 

1.1 Calculate the materials needed.jpg

Step 2

The plate brackets are usually 250mm long so start by marking the halfway point on all of them before hammering them all into place with your claw hammer down to the halfway point you marked. A flat head screwdriver comes in handy to create some space for the plate bracket between the top rail and the upright depending on how closely they’ve been installed.

 

With the plate brackets in place, slide one 300mm upright over the bracket and place a second one up against it. Now clamp them together and ensure they’re level. Then pop two of the button head screws through both uprights and the plate bracket in a diagonal configuration.

 

2.1 Hammer the plate bracket down halfway.jpg  2.2 Slide the uprights over the bracket and clamp them together.png

Step 3

With all your upright extensions in place, slide one end of a rail into an upright, then slide the other end in a downward direction to fit into the upright at the other end of the section. This is your new bottom rail. Once it’s in place, pop a screw in each end and one in the middle to attach it to the top rail of the existing fence. Repeat this step for each section.

 

3.1 Slide one end of the rail first.jpg

 

Step 4

Now pop your first sheet into the bottom rail and slide it into the upright. Ensure you align the profile with the existing fence below. With the first one in place, take note of how and where the sheets on the existing fence overlap each other and continue inserting your remaining sheets, keeping an eye on the alignment of your profile.

 

For this step, do only one section, then go to Step 5.

 

4.1 Pop your first sheet into the bottom rail.jpg

Step 5

With a section of sheets in place, grab another rail and insert one end into the upright (like you did in Step 4). Slowly and carefully wriggle it into place over the sheets dealing with small parts at a time. Wriggling the rail back and forth, essentially following the wavy profile of the sheets, will help get it in place.

 

Once it’s in place, check it’s level then screw a hex head through the uprights and into the rail (at the top) to hold it in place. Do the same on the other side of the upright (neighbour’s side). Repeat for the bottom of the uprights. Note that it’s not necessary to do the bottom of the upright on neighbour’s side.

 

Repeat Step 4 and 5 until all sections are complete. You have now finished your Colorbond fence extensions. Now is the perfect time to clean off any cobwebs and dirt and treat it all with pest spray.

 

5.1 Wriggle the rail back and forth to get it into place.jpg  5.2 Check the rail is level.jpg  5.3 Screw hex head through the uprights and into the rail.jpg  5.4 Finished extensions.jpg

Step 6

You might like to consider cladding your fence to add sophistication and style to your backyard. There are many options to consider, from quality fibre cement products from James Hardie through to pre-made and bespoke timber screening. Whichever way you go, you’re going to need to install a H3 treated pine frame to attach your cladding to and the type of framing required will depend on your chosen cladding.

 

An already braced premade timber panel will likely only require some 50 x 25mm treated pine fixed to the top and bottom rails with 14g x 50mm Metal Teks. Then use either colour-matched timber screws or trim head screws to fix the panels to the treated pine frame.

 

Fibre cement would require a more complex 70x35mm treated pine frame to be attached to the top and bottom rails along with vertical lengths at certain points (see installation guides) and noggins to ensure a strong foundation.

 

If you need a hand with your fence cladding project, just let us know by commenting below. Good luck and please share your project with the community. 

 

6.1 Adding Merbau cladding.jpg  6.2 Finished Merbau.jpg  6.3 Frame for fibre cement cladding.png  6.4 Finished fibre cement cladding.jpg  6.5 Finished fibre cement cladding.jpg

Materials

Tools

  • Tape measure
  • Spirit level (ideally 2100mm)
  • Pencil or marker
  • Clamps which open at least 150mm
  • Claw hammer
  • Rubber mallet or dead blow hammer
  • Large flat head screwdriver
  • Drill – An impact driver makes the job easier
  • Ladder (tall enough for you to safely reach a drilling point of 2100mm)
  • Angle grinder or hacksaw with a steel blade
  • Personal protective equipment

Images

1.1 Calculate the materials needed.jpg 

2.1 Hammer the plate bracket down halfway.jpg 

2.2 Slide the uprights over the bracket and clamp them together.png 

3.1 Slide one end of the rail first.jpg 

4.1 Pop your first sheet into the bottom rail.jpg 

5.1 Wriggle the rail back and forth to get it into place.jpg 

5.2 Check the rail is level.jpg 

5.3 Screw hex head through the uprights and into the rail.jpg 

5.4 Finished extensions.jpg 

6.1 Adding Merbau cladding.jpg 

6.2 Finished Merbau.jpg 

6.3 Frame for fibre cement cladding.png 

6.4 Finished fibre cement cladding.jpg 

6.5 Finished fibre cement cladding.jpg

 

14 Replies
algenebautista
Growing in Experience

This is what I need for my fence extension. Thanks heaps!

algenebautista
Growing in Experience

This is my existing fence on one side.

20201011_111907.jpg

marly
Just Starting Out

Thank you for your tutorial, Can you point me where I can buy the materials at bunnings. I want to build 600mm extentions. I am looking for the following at bunnings:

 

Plate brackets to support 600mm extentions ( where can I find these)

600mm uprights

 

Infill sheets 600mm

 

I figure i would have to cut the post upright extentions and colorbond infill sheets to 600mm

Do they sell this pre-cut anyway?

 

Can anyone help me.

 

 

Jason
Community Manager
Community Manager

Hi @marly,

 

Thanks for joining in the discussion. Glad to see you have been inspired by @ProjectPete's guide. Our resident Bunnings D.I.Y. expert @EricL will be more than happy to help you with your shopping list when he's back on the site on the weekend. Thanks for your patience in the meantime, and a very warm welcome to the Bunnings Workshop community.

 

Jason

  

EricL
Bunnings Team Member
Bunnings Team Member

Hello @marly

 

Thank you so much for joining us and sharing your question about extending your Colorbond fence.

 

It's great that you've found @ProjectPete's guide useful. I can only find the COLORBOND Steel 340mm Domain Fencing Post Extension at the moment. It may be a part that will have to be specially ordered at the store. Let me make some inquiries for you about the parts that you specified and get back to you.

 

Should you need to cut the Colorbond Fencing Panel I recommend using the P&N Nibbler Attachment 1/4" Shank. It transforms your power drill into an easy-to-use straight or curve cutter for sheet metals, corrugated sheets, spiral ducts, plastic sheets, or laminate.

 

Eric

 

jacquimaria
Just Starting Out

Hi, this is helpful thanks.

I can't find the 300mm solid sheets online at Bunnings. Are these available?

Thanks

EricL
Bunnings Team Member
Bunnings Team Member

Hello @jacquimaria

 

Welcome to the Bunnings Workshop community. Thank you for joining us and sharing your question about the Colorbond extension sheets.

 

I'm so sorry, but the most common sheets available at the store are the Colorbond 2350mm Fencing Lattice. If you are after a specific Colorbond colour extension sheet, it will have to be specially ordered at the Special Orders Desk. I recommend ordering the extension sheet as a full set in your preferred colour. This will include the left and right extension posts and the top and bottom rails. Please make sure to bring your current fence measurements, specifically the distance between posts. It sounds like a great project, please keep us updated.

 

If you need more advice or information, please let us know.

 

Eric

 

EricL
Bunnings Team Member
Bunnings Team Member

Hello @marly

 

I've spoken to our provider about you're preferred extension. I'm so sorry but I've been informed that the maximum extension kit height is 340mm. Having a 600mm extension on top of your existing fence is not recommended as it could bend or warp your existing fence. I suggest as an option to build a vertical raised garden bed with a trellis backing. You can build this higher than your fence and have a beautiful garden at the same time. Please keep us updated.  

 

Here is a link to the raised garden bed project: How to build a vertical garden by @MitchellMc

 

Let me tag our experienced members @tom_builds and @TedBear for their recommendations.

 

If you need more advice or information, please let us know.

 

Eric

 

beau2008
Just Starting Out

Hi

    Could you tell me where or how I go about getting hold of the materials required to extend my colorbond fence. I was in our store yesterday and did not see this type of extension kit. Do they need to be ordered. Cheers

MitchellMc
Bunnings Team Member
Bunnings Team Member

Welcome to the Bunnings Workshop community @beau2008. It's great to have you join us, and many thanks for your question about extending your Colorbond fence.

What brand of Colorbond fence do you have? There are several suppliers of this kind of steel fencing, and each of them has its own extension kits. If your fence was one of the brands we dealt with, then we could order the extension kit for you. Otherwise, you'd need to source it from the relevant supplier. 

 

The only extension products we keep in store are these COLORBOND Steel 340mm Fencing Post Extension used for the installation of lattice profiles.

Mitchell

 

Andrew11
Just Starting Out

Good evening,

 

I would like to do the above fence extension on my existing colourbond fence.  I went to my local Bunnings store at Narellan NSW and they sent off an e mail but the response was for a different fence extension.  So frustrating. 

I want to get this fence extension from Bunnings.  

Can you please help me please?

Thanks!

Regards

Andrew

EricL
Bunnings Team Member
Bunnings Team Member

Hello @Andrew11 

 

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about your fence extension.

 

I'm sorry you did not get the parts you were after. In order to give us a better idea of what your Colorbond fence looks like, would it be possible for you to post a photo of its post and rail? We can then make recommendations on how to proceed.

 

I also suggest having a look at this discussion - Re: attaching Colorbond fence extension to existing fence by @hbye. It's an excellent example of how the fence extension was attached and built using standard Colorbond fence parts.

 

If you need a hand posting the photos, please let me know.

 

Eric

 

Andrew11
Just Starting Out

Hi Eric 

Thank you for the reply.

I am after exactly what is pictured in this post.  The colourbond fence by project pete.  I am not after lattice.

I am looking at 300mm high x normal length colourbond.  

This is a copy and paste from above:

My existing fence is very standard.  Classic cream colourbond and looking to purchase 16 kits minimum.

 

Can bunnings help me with this?

 

Thanks!

 

Regards

Andrew 

 

EricL
Bunnings Team Member
Bunnings Team Member

Hello @Andrew11 

 

@ProjectPete  utilized extensions designed by the manufacturer of his specific Colorbond fence. Given the variety of post profiles available, you would need to contact the supplier of your particular fence so that you can acquire the suitable extension kit. It's important to note that these kits are not universal across different brands. This is why I was requesting for a photo of your Colorbond fence.

 

For example, the fencing rail we carry is the COLORBOND Steel 2350mm Monument Fencing Rail. You'll see that it is a different profile from ProjectPete's.

 

In the lattice post I directed you to, you'll notice in the last post in that discussion the community member Baron had the same fence profile as ProjectPete's, but they were still able to use the standard parts available at the store. I'm just showing it to you to let you know that it is a viable option.

 

The parts available at the store are the following:

 

 

I hope this clears up the confusion. These parts are what you need to extend your Colorbond fence.

 

If you need further assistance, please let us know.

 

Eric

 

fence 1.jpg

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects