Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

My little side table

Super_D
Becoming a Leader

My little side table

I just made this little side table, from 3mm Plywood Pine Premium and 42X19 DAR Pine and a Merbau panel.
It was a nice little project and it is all just glued together.

 

387324186_339783488589319_1912586810121132096_n.jpg

I use my table saw for the strips I just glued a block on the end so I could sand them

all together as one piece so that they would be all the same.

391581101_10230218904238485_164897292711299662_n.jpg391600630_10230218903398464_4873829448262097158_n.jpg

I also use the table saw to cut the top and the bottom Merbau panel together so they would match up.

 

391578731_10230218903958478_4779614980341555566_n.jpg386109077_10230218903598469_1947160419596251139_n.jpg391578665_10230218903758473_7286066206455892206_n.jpg

391598970_10230218904158483_3137788750444976793_n.jpg391574983_10230218903518467_1819808910697804340_n.jpg

I just used a clamp to bend the ply wood and use a router to finish the top and bottom and add 4 little feet underneath

Materials

PVA Glue 

Decor and Furniture Lacquer from Kmart (because I had it)

https://www.bunnings.com.au/specrite-1200-x-300mm-18mm-timber-panel-merbau-fj-laminated-1200-x-300-x...

https://www.bunnings.com.au/42-x-19mm-1-2m-dar-pine-standard_p8401487

https://www.bunnings.com.au/1200-x-810mm-3mm-plywood-pine-premium-bc-grade_p0340268

 

 

Tools

Aldi small Table Saw with a slid that I built for this project...

Ozito 850W Router 

Bosh orbital sander

Ryobi  Multi Tool

Dave-1
Community Megastar

Re: My Little side table....

Afternoon @Super_D 

Thats a nice looking table! What type of glue di dyou use? It really looks like its holding up to the job! 

Love the lines of it.

 

Dave

Super_D
Becoming a Leader

Re: My Little side table....

Thanks for that, it was a fun little project.....
I saw a picture on the net and I also loved the lines like an hour glass, and thought that I can make that, no plan only in my head, I made it up as I went.
I just used PVA wood glue for the 2 main legs and for the straps I just glued in the middle of them, just before they joined each other, and then used the clear varnish as glue as they were very tight and and hard to work out where to put the glue, the clear varnish was good as it soaked into the gapes...

Dave-1
Community Megastar

Re: My Little side table....

@Super_D 

:surprised: Wow, how long has it held its shape? I am impressed with that glue/varnish!

 

Dave

Super_D
Becoming a Leader

Re: My Little side table....

Its been only a week, but the 3ply almost stayed in place with out the glue as it has a tight bend on the top and bottom. Vanish does make a good glue, in other applications.

EricL
Bunnings Team Member
Bunnings Team Member

Re: My Little side table....

Hi @Super_D 

 

Thank you very much for sharing your side table project. What an artistic and clever assembly. I can just imagine that it becomes an immediate topic of discussion as soon as the person seeing it realizes that you built it. The wavy bent timber is really eye catching, if I had not seen the assembly method, I would probably still be wondering how you got them to bend so uniformly. What was your source of inspiration for this build?

 

Again, thank you for sharing such a wonderful project. 

 

Eric

 

See something interesting? Give it the thumbs up!
Super_D
Becoming a Leader

Re: My Little side table....

Thanks Eric,
I had to work out to bend them, as I was just going from a photo. One broke but I made a few spare ones just in case...

Ready2go
Building a Reputation

Re: My Little side table....

very, very cool project!

how did you keep the top and base parallel while bending the ply?

Re: My Little side table....

I glued the main 2 legs in place first, and they were square, then slowly bent the ply... 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects