Workshop
Ask a question

Topics with Label: Furniture

amity23
Community Newcomer
1 reply

Hi there, we are planning on using the Merbau Specrite panels (cut in half length ways) as shelving for the bookshelves in my office. We have heard th ...

s0809tw
Just Starting Out
6 replies

Hi there, I recently used the DAR Pine Premium to build a bookshelf. However, when I applied the stain Feast Watson 250ml Old Baltic , it shows these ...

Wing
Growing in Experience
4 replies

I had an old set of drawers in the garage that were practical but very marked and ugly. I thought I would try to make them more attractive and individ ...

EllTee
Just Starting Out
1 reply

I have painted a table, and then applied a varnish to it. While setting, the varnish became bubbly, and I have realized that there are particles from ...

melpag
Getting Established
1 reply

I sanded entire table back painted the bottom half with charcoal milk paint. And glossed the top with Cabot's clear changed drawer knobs for Lane br ...

bobbinthebard
Just Starting Out
3 replies

Hi brains trust, I'm hoping to extend the height of this bed by about 42cm with the extensions on the base of the legs (currently the supporting ...

joanneeadie
Just Starting Out
2 replies

Hi, could I please have some advice on adding feet to this unit to make into a hall table, do I need to add one to the centre to stop it bowing in the ...

Jason_s
Just Starting Out
2 replies

     So I've built this wall frame for my window box air conditioner that sits in my sliding door tracts but can be moved out whenever I want to lo ...

rubi67
Just Starting Out
1 reply

I have what I think is luxury vinyl plank flooring in a loft, and I'd like to install custom bookshelf on one side, and a series of cabinets on the op ...

marty2
Just Starting Out
1 reply

I’ve stained an old piece of furniture and then tried putting on a coat of Cabot’s Benchtop Clear to seal it. Unfortunately the benchtop clear turns w ...

heidig
Finding My Feet
8 replies

Hi all, We have this flexistorage wardrobe. It's just not working for my kids rooms. How can i make it better adding more draws or anything? They both ...

diana64
Just Starting Out
1 reply

I am staining an oak table, which was striped back and sanded. I chose Cabots Walnut interior stain and applied one coat. The table looks lovely but i ...

J-P
Making a Splash
1 reply

Our previous couch had an ottoman that will fit well with it forming a bed for us to relax and watch movie nights. We were missing it with the new cou ...

Goldilocks
Just Starting Out
3 replies

I have this timber bookshelf which doesn't match anything else so I want to paint it white. It's solid timber and a matte finish. Would I would need a ...

maddi1
Finding My Feet
5 replies

Hi, I am wanting to build a double loft bed to suit 2 adults but I want the base bigger than the mattress so I can put storage above too. I was thinki ...

nathan640
Finding My Feet
3 replies

Recently bought a wooden bedframe 2nd hand. Put it together and after a few weeks the screws have come slightly loose in one corner of the bed causing ...

CGW49
Just Starting Out
1 reply

Hi I need replacement bolts for a bed frame as they have been lost. I need 8ea M6 x 110mm. The Bunnings stores I've been to say they don't have them. ...

charlottefoth98
Just Starting Out
1 reply

   This metal table appears to be losing its top layer and leaving a white mark underneath? I’m just wondering how I go about restoring it? I’m not ...

NolsE
Growing in Experience
1 reply

Everyone needs an under sofa table. Fabulous for enjoying a cuppa while comfy on the couch. It is the perfect height whilst sitting on the couch as it ...

NolsE
Growing in Experience
1 reply

Another slim console table for small spaces. Ideal for units and small entryway. Even handy in the bedroom for a TV.MaterialsI got 60X60mm pine for th ...

dunnycan
Just Starting Out
1 reply

Hi, I’m replacing my inbuilt wardrobe. Originally was going to paint it but the wardrobe was starting to disintegrate so ripped it out. The left si ...

HandyBird
Getting Established
1 reply

I am wanting to build 2 shelves that Bunnings will need to cut to size for me. I am wondering what timber/plywood to use. The first one needs to be 10 ...

NolsE
Growing in Experience
1 reply

Many console tables are too wide or too big for small areas. I have been making slim tables from re-cycled and unwanted timber. Painting the legs and ...

raydowns
Just Starting Out
2 replies

i want to lean to biuld a 6 ft fish tank stand as i am only a begnier