Workshop
Start a discussion

Topics with Label: Recycling and Upcycling

craftyhopper
New Contributor
3 replies

         A neighbour was throwing this out, so I got it for free!The draws looked like a sad face ☹️ so I covered them with ply for a flush lookT ...

KevinMall
Established Contributor
2 replies

Here are some photos if early stages if my current project. A budget priced coffee table.Timber taken from a pallet broken up by me then cut to length ...

MitchellM
Valued Contributor
8 replies

Baby number two is only a couple of months away, so their big sister needed to relinquish the cot and move up in the world. Perhaps it was the tugg ...

AnitaH25
Established Contributor
11 replies

pepsp
Established Contributor
3 replies

Just thought I'd share my chair rennovation project completed during 2020 (thanks to lockdown I had plenty of time!)   It was pretty simple to remo ...

Yorky88
Super Contributor
11 replies

bellee78
New Contributor
1 reply

I was always passionate to antique/vintage stuff. Since I moved to Australia, I found lots of vintage furnitures such as vintage treadle sewing mac ...

MitchellM
Valued Contributor
4 replies
May

I thought I would share a pallet coffee table I built over my weekend. I used a very similar process to the D.I.Y. article How to build a simple co ...

dean
Junior Contributor
19 replies
May

I have only been playing around with wood for 2 months now, and at the start of September i decided to build a table after i completed a coffee table ...

prettyliving
Super Contributor
5 replies

prettyliving
Super Contributor
2 replies

Thought I’d share the dollhouse “reno” I did last week. I wanted to try and use only bits and pieces that I already had at home so I had to get a litt ...

prettyliving
Super Contributor
2 replies

            Thought I’d share my little diy project from yesterday (was mostly an excuse to try out my new Ryobi sander.  I had a little decora ...

WCE2019
Former Community Member
24 replies

Hello Workshop Community, in school i have been given a task to make 'somthing' out of two pallets they are aprox 1.25x1.25m i have decided to make a ...

Tara86
Super Contributor
9 replies

Everything I have made has been for personal use or as a gift. Recently my amazing boss asked me to make her a wooden clock to finish off their kitch ...

Poppop
Senior Contributor
3 replies

Starkers_17
Budding Contributor
5 replies

I turned a couple of piles of old material into a coffee table. 50 year old bed posts20 year old steelTable machined and joinedTest fit

AnitaH25
Established Contributor
4 replies

I saw these wine barrel tables on Pinterest and it was love at first sight. I just did not want the rustic look. I wanted mine to be a more finished ...

AndrewJones
Experienced Contributor
5 replies

Beachbox
Junior Contributor
2 replies

Hi Guys, I have'nt posted for a while but I thought that this one was worth sharing with you. Really enjoyed making this one,I had saved a photo a ...

Tara86
Super Contributor
5 replies

My daughters decided they wanted to share a bedroom. Issue was how to sort out 2 bedroom cupboards into 1. Previous drawers I used were old and fallin ...

pete_brig
Established Contributor
1 reply

We have an al fresco area & wanted/needed a coffee table, especially as we had visitors coming over My wife had salvaged 2 Euro pallets from roofing ...

monlew
Budding Contributor
2 replies

#firstpalletbuild

leon3758
New Contributor
3 replies

Andadams
Junior Contributor
24 replies

I have finally finished my latest DIY project, which unfortunately took me over 6weeks from start to finish. But now that my table reno is completed, ...