Workshop
Start a discussion

Topics with Label: Craft and Hobbies

michael_cc
New Contributor
6 replies

I have a 600x600mm piece of 3mm thick acrylic sheet and I would like to cut it to a 550x550mm sized piece for a personal project. Does Bunnings have a ...

prettyliving
Super Contributor
6 replies

 A few weeks ago I picked up an old wooden dollhouse for cheap on marketplace. I went to Bunnings and got some vinyl tiles, cheap green carpet, artifi ...

JoeAzza
Experienced Contributor
3 replies

Made these simple CD display shelves for my one of my grandkids bedroom, they are made from Tassie Oak, 42x12mm for the backing and 65x12mm for the ba ...

SaraD0510
New Contributor
6 replies

Hi, My friend and I would like to attempt this trendy tiled look but on the Ikea Lack table (just the basic $13 one) and we're not entirely sure how m ...

Jamespeter100
Established Contributor
2 replies

I like Wally’s Walpamur paint, this is the fence paint being used on a table. A large circle and a smaller circle, with legs that look like the lette ...

2 replies

Hi everyone I am just wanting to create small wooden stands for some acrylic blanks that I am going to design as decorations around my house/gifts fo ...

Julieg9426
Junior Contributor
3 replies

Wondering if anyone has updated their old Pine Dressers with paint and/or wallpaper and how you went about it? We’re building a new house and the pin ...

EdwardW
Junior Contributor
10 replies

A mini bar I have built for a friend... The electric heater niche was empty, and it seemed like a great idea. The body is 19mm structural plywood, sa ...

douglas82
Budding Browser
2 replies

Have several completed jigsaws that I wish to frame i hope to make frames for these but have found very little information on ways to make them, have ...

AnitaH25
Established Contributor
3 replies

After destroying yet another expensive gaming headset, by rolling over the wires with the computer chair. I thought it was time to make a stand for th ...

Community Manager Jason
Community Manager
30 replies

Who wants one of these underneath the Christmas tree this year? The $30 Limited Edition Building Block Warehouse collectables are making their w ...

Wouldy
Experienced Contributor
2 replies

I have had this sitting in my shed for about two weeks. It was given to me by a friend. Apparently a child was using it as a huge swing in a garage. ...

Pcreations
Budding Browser
4 replies

Hi, I need to know which is the best glue to stick stones and pebbles to the mirror and also to stick stones together.

consoletable
Budding Contributor
3 replies

Hit a roadblock with woodcutting earlier but managed to complete the project eventually - big thanks to @MitchellMc who gave some great advice to my p ...

kel
Experienced Contributor
8 replies

consoletable
Budding Contributor
1 reply

Further to my earlier console table project for housing some living room entertainment electronics, I also tried to find a way to manage the messy cab ...

RenoSal
New Contributor
2 replies

I bought bamboo posts and a bamboo outdoor screen to make a four poster bed.Firstly, I started with the metal bed base and cable tied the upright bamb ...

RenoSal
New Contributor
2 replies

How simple. All I did was remove the pelmet to make it easier to work with.Then I hot glued macrame cord to it.

tish999
New Contributor
3 replies

 made a Christmas tree from an old pallet lying around as we had no space for our 6foot one

Richardc007
Newbie
2 replies

would like what to use timber wise for a table about 1200 wide 180 high 360 depth to be able to take 16Kg in weight.I was thing pine panels

prettyliving
Super Contributor
36 replies

      This past week I’ve been working on a ‘ute’ bookshelf for my son. I used pine boards from Bunnings which I stained with black paint and water ...

mia9321
New Contributor
3 replies

I'm looking to attach 3mm thick acrylic to 5mm thick hardwood and am not sure which screw type and size to use. To clarify, I want to attach the long ...

Tinyfeather60
Junior Contributor
2 replies

Hi everyone hope everyone is safe and well I’m going to make my own moulds out of silicone for drawer handles made from resin what I want to know is w ...

Radish
New Contributor
4 replies

I've been given a lovely photo in a frame to hang on the wall.I would prefer to have it stand on a table. The back infill is14" x 11". Has anyone ...