Workshop
Start a discussion

Topics with Label: Decorating

anjali
Budding Contributor
5 replies

Hi Everyone, So I'm my rental apartment that I moved into recently, there were really scary lamp shades off that looked like they would fall on my he ...

loggie
Budding Contributor
5 replies

Hello,Just sharing a project I did over the weekend. It can be easily adjusted to suit whatever space you are looking at. The utility panel I used for ...

JoeAzza
Experienced Contributor
9 replies

After being inspired by @joineryjo planter stands, I decided to make my own similar/same as @joineryjo . The only difference is that I used Tasmani ...

dtothy
Newbie
1 reply

does anyone have advice on how to install

Freda1
New Contributor
1 reply

Hi guys i have been going to bunnings alot to buy resources but ended up buying bulk timber from facebook market.place. But paint, screws nails, advic ...

Community Manager Jason
Community Manager
1 reply

In the second of our Make It Happen series, the team works on a dramatic living room transformation. 20-year-old Max has turned half of his Mum's ...

ProjectPete
Trusted Contributor
13 replies

At my wife's request I got to work on this recessed TV feature wall in our living room and we're so happy with how it turned out  Would love to hear ...

Louisecomau
New Contributor
5 replies

Hello! Doing a bedroom project. I am looking to special order some easy craft 900mm high lining boards (link), Had anyone installed these and could ...

chezzle
Budding Browser
8 replies

SaraD0510
New Contributor
6 replies

Hi, My friend and I would like to attempt this trendy tiled look but on the Ikea Lack table (just the basic $13 one) and we're not entirely sure how m ...

Jamespeter100
Established Contributor
2 replies

I like Wally’s Walpamur paint, this is the fence paint being used on a table. A large circle and a smaller circle, with legs that look like the lette ...

vica
Experienced Contributor
14 replies

Hi,Good morning!The lock of my bedroom is out work. This is the old lock ( imag1-3) . I removed it , filled the holes and gouge , but I can not find h ...

2 replies

Hi everyone I am just wanting to create small wooden stands for some acrylic blanks that I am going to design as decorations around my house/gifts fo ...

redracer01
Trusted Contributor
10 replies

Hello Friends, Just wanted to show you guys final outcome of my book case / tv cabinet. Took about 3 weeks in total. Very happy with final outcome. Ch ...

EdwardW
Junior Contributor
10 replies

A mini bar I have built for a friend... The electric heater niche was empty, and it seemed like a great idea. The body is 19mm structural plywood, sa ...

monicaokko
Regular Browser
1 reply

 first attempt at making builtin wardrobes and dressing table

loggie
Budding Contributor
18 replies

Hello,I'm looking to clad an open brick fireplace with stack stone. I was thinking of attaching cement sheets to the front and sides to give the stone ...

TS14
New Contributor
6 replies

   I am a total newbie and unable to fix this lamp shade to the lamp stand ? Any clue on how to open the bulb socket and get it through the lamp shade ...

ninewa
New Contributor
3 replies

   

newbie25
Budding Contributor
13 replies

Just bought a house and came to know that the led downlights installed are cool white which i absolutely hate . There are approximately 25 sharp white ...

Carol_Prime
Established Contributor
1 reply

This spare room had 2 king single beds in it and not much else. Very unused and adding us zero value. SO....... the beds went and Clever Cube ...

pepsp
Established Contributor
3 replies

Just thought I'd share my chair rennovation project completed during 2020 (thanks to lockdown I had plenty of time!)  It was pretty simple to remove t ...

HyacinthBucket
Budding Contributor
2 replies

Hi This is a project from my previous home. In the first picture you can see a gas fire and alcoves. I took the gas fire out, decorated it and p ...

consoletable
Budding Contributor
1 reply

Further to my earlier console table project for housing some living room entertainment electronics, I also tried to find a way to manage the messy cab ...