I want to cut a concrete garden path to turn part of it into a garden bed.
I'm assuming that the Kango 350m diamond blade would be a reasonable one to use. What would be the corresponding tool to drive it, please? None of the angle grinders or circular saws seem to be this large?
Solved! See most helpful response
Welcome to the Bunnings Workshop community. Thank you for joining us and sharing your question about cutting a concrete path.
The Kango 350mm Segmented Diamond Blade is actually used on large concrete cutting machines. Here is an example of a tool that will drive it: For Hire: Coates Demolition Saw. In this instance, I would recommend just renting the tool if you are not using it on a large number of projects. If you are planning your own garden, please make sure to keep us updated. I'm sure our members would love to see your project.
We look forward to seeing the start of your garden.
Thanks, I never would have found that!
Do you know if there's a tool that would have the blade offset to one side? I want to cut parallel to a fence, and this looks quite wide in the photos, with the blade in the centre...
The concrete cutter is actually offset, you may have to go in the other direction to use the narrow side of the cutter facing your fence. However, if you wish to get even closer you may have to hire a different type of concrete cutter for example Concrete Saw - 450MM.
If you need more advice or information, please let us know.
That may be a bit over the top
If it's offset, I guess I'll cut what I can with the hand-held concrete saw, then if needed I can finish it off with the angle grinder with a smaller blade
Thank you for the help!