Hello! I'm looking to rip up these old pavers and Relevel them as they currently have a bit of a slope to the house. And I'm concerned about drainage ...
This is a firepit I made from scratch on a sloping block.MaterialsRender
Cobble stones
Sealer
Concrete
Mortar
Reinforcing mesh/rod
Paint
Sand
Black p ...
Hi All , I have a question regarding piles to bearers . The deck is 10 m x 4 m 400 mm high ( ground to top of deck ) bearers will be flush with joist ...
I have started planning out my deck build in my backyard.Looking for advice if it safe to fix bearers sitting on a post on one side then directly fix ...
Trying to add 4 supporting posts of a new pergola onto the existing decking, current decking is around 400mm off the ground. Are all posts need to be ...
I want to build a timber ramp over a stormwater pipe that crosses a concrete pathway next to the house. The ramp needs to be 850mm wide (it is not pos ...
Hi,
I am looking at installing the Protector pool fence. I noticed the instructions for the in ground posts say dig a 600mm hole which would only th ...
My son installed a new black protector gate to keep my dog in. I now find she is jumping it, if she sees a cat or a bush turkey.It was a lot of work a ...
Hi,
On my balcony have what appears to be spilled render stuck on grout between tiles.
Have tried using 50% white vinegar with 50% water spray and S ...
Good Evening Folks
I would like to construct a small arbour say 2metres by 3 metres and 2 metres high. Posts say 90x90
This question is about creati ...
Hey there everybody, I just need some advice on what to do with my gutters.
The first pic (looking left), I think the guttering is pretty OK - the g ...
We have a stenciled concrete driveway and paths that, after several years, started to look weathered and in need of maintenance. To refresh its appear ...
After building our deck last year, it took me another year to finally start and finish our backyard. We have a small space available so I had to utili ...