We have a pool water-feature in front of the Timber fence. please refer to the photos attached. We built the water-feature box in block-wall and cover ...
I have a Lay z spa Maldives, and i cant seem to work out one of the pockets that i would have thought was a hole for one of the jets. I took a look at ...
Our pool area is very dated. Is there a way that I can paint this printed concrete without having to grind it down? I don’t mind the pattern. Can t ...
I’m a novice with endless ideas however no experience!! We are landscaping garden, putting a slab down to support weight & installation of a spa 3.5 ...
I am wanting advice on types of materials to extend the height of a boundary fence- must not have finger hold points, for pool compliance. I have been ...
Removed existing hedges replaced with artificial to reduce up keep and cost
Demolished and removal of existing hedges removal, construct scaffoldin ...
Would like to repair existing pebblecreat at my swiming pool that is above water level and a support on this matter would be appreciated. Especially w ...
Hi Bunnings community,
I am in the planning stage of a 50sqm Merbau low-level deck located next to our pool. 30sqm of the deck will be under the awnin ...
I'm needing advice please. My sandstone water feature waterfall in my pool area is 13 years old and never been resealed. The sandstone is disintegra ...
I was given the task to turn a wasted space under an above ground pool deck in to useable space for pool toys, furniture cushions and other items. It ...
My old pool area had treated pine decking which was cracked and splintered. It also had a bar which blocked off the undercover entertaining area. I kn ...
Once the house renovations were complete, the next job was the outside starting with the front. First we ripped up the old driveway brick pavers and r ...
Built a 3M x 4M kwila deck for the back patio.MaterialsKwila decking from Bunnings 150 x 90 unstained.
Decking joists 150 x 45
Coach Bolts - no nai ...