Workshop
Ask a question

Topics with Label: Tools and Materials

jefferydeducke
Community Newcomer
1 reply

Hi, I have accidentally used a wet vacuum over my tiles and let it dry - but they seem to have left these tiger-stripe like streaks. Warm water and ...

Ben2065
Building a Reputation
10 replies

Hi everyone, I am slowly restoring my heritage cottage (built around 1900). Current project is to install stud wall immediately to the right (hot wa ...

Ben2065
Building a Reputation
25 replies

Hi everyone, I am slowly restoring my heritage home (built aprox 1890's) I am currently trying to divide my original double hung window (no sash cor ...

LynneWasTaken
Growing in Experience
13 replies

I have a small shower bench with a new ding / dent, and I'm interested in any tips that might help me repair it myself. At the outset I should say - ...

Edgar
Cultivating a Following
4 replies

I am trying to figure out the best way to reinstate/restore the old 60's style bathroom medicine cabinet. The recess still exits, as does the original ...

LynneWasTaken
Growing in Experience
3 replies

I have an Everhard / Nugleam laundry trough with a fine crack, leaking. The install for this was *ugly* and I reckon that would void the warranty. ...

Scootergirl
Cultivating a Following
2 replies

Hi,I'm in the middle of planning a bathroom reno. I want to install wall hung vanities in the powder room and ensuite. I think it would look great to ...

RosemaryK
Building a Reputation
3 replies

Hello Im trying to replace the shower head on this shower hose. I like the design of the hose - the way it hangs on the shower wall. The head has brok ...

Garen
Just Starting Out
10 replies

Hi Team, Im replacing a subfloor in my bathroom and getting conflicting info in what i should be using. Ill list my project below 1950s house with f ...

Richard44
Growing in Experience
3 replies

Hi Eric, Damp came through the shower wall into the dinning wall ground level, and rose up about 1/2 m, which has bean fixed by a damp proof person ab ...

Chin
Finding My Feet
2 replies

Helloooo. I have a small apartment and my laundry looks terrible. I’m thinking to build a bench top and a cabinet/shelves in between of the washing ma ...

MrBigSandwich
Just Starting Out
2 replies

Long time lurker. First time poster! My shower head holder has come off and is super rusted. I don’t know where to start with the washers. Tried re ...

Wellington1
Just Starting Out
3 replies

Hidden bolts on toilet seat. Seat anchored underneath with bolts

rowie_9
Just Starting Out
1 reply

Hi All, I’m looking for some advice on repairing a few ~10 mm holes in the walls of our bathroom. The panels appear to be a high‑pressure melamine ...

KenM
Just Starting Out
1 reply

Is it easy to fit Solar Frost Window Film?

rmnp
Just Starting Out
1 reply

Hi team, bottom row tiles of my bathroom have hairline cracks and building up would. There are no signs of water leakage to the walls. And cracks are ...

kayara
Growing in Experience
19 replies

Unless I turn the shower handles off extremely hard, the showerhead drips. I'd like to fix this so the shower handles can just be turned off normally ...

Genie
Just Starting Out
6 replies

Hi, tap in 50 yr old home is leaking to the extent where the water meter is now continuously running. I’ve removed the handle but the part circled in ...

toiletseatstuck
Just Starting Out
2 replies

Have two of these toilets and the hinges I cannot for the life of me figure out how to get off.. have tried googling and have found heaps of people w ...

theDIYedit
Making a Splash
37 replies

I thought I would share my just-finished laundry renovation. I bought a house in 2020, and although she is only 18 years old, she has been neglected h ...

Heath1980
Getting Established
1 reply

Hello...... Framing out a stud wall and have removed cornice so the timber can go closer to the ceiling. Gyprock is about to go in and then I need t ...

Steve8
Just Starting Out
2 replies

(First time poster, long time reader!) Hi I'm building an ensuite and about to install Secura flooring. I have a timber stud wall that needs to be ins ...

Christalaura
Just Starting Out
9 replies

Hi, Can I join fibre cement sheeting with fibreglass joiner tape and joint compound? Or do I need to use a thin-set cement? I do not want to use the ...

dio612
Getting Established
1 reply

Hi bunning's workshop community, I've noticed that there are gaps in the corner's of the shower and bathroom, and would appreciate any advice/in ...