Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Get started

Kitchen

Help for kitchen renovation projects

Browse by topic:

Building And Construction

Latest

Finding My Feet

8 replies

I can't find any pre drilled (with holes) melamine sheets for internal walk in pantry. Any other ideas for putting shelves up in here? I want it to l ...

Just Starting Out

2 replies

I want to expand the opening into my under stair area to access shelving easier. I’m not sure if the wall is load bearing and can’t afford a structura ...

Building a Reputation

1 reply

what can I use to finish this panelling off on the end of this wall as I’m not panelling around the corner it’s just that wall? Thanks so much in adv ...

Finding My Feet

15 replies

Hello, I am looking at installing floor select hybrid 6mm blackbutt hybrid boards in my Kitchen and living rom area as they are one larger area. a) ...

Building a Reputation

4 replies

I made this bench seat and am looking for advice on the best way to join the pieces of hardwood that make up the top. They are offcuts from the tablet ...

Just Starting Out

1 reply

Hi Workshoppers, I'm sheeting kitchen walls 3450 x 2400 high. In what direction should I place the sheets; vertically or horizontally? Also, what ty ...

Just Starting Out

3 replies

I want to add a few additional shelves into my kitchen cabinets: 3 short shelves: 350x280x16 3 longer shelves: 735x280x16 I measured up 3 of the ...

Having an Impact

21 replies

Hi there! I'm going to be installing some kitchen cabinets in our small pantry and need some advice about benchtops as it will need to fit an L-shape ...

Getting Established

1 reply

Here is a project for my granddaughter for Xmas. Her mum asked if I could build her a kitchen out of cheap materials. This was built from recycled m ...

Finding My Feet

1 reply

Hi there, So I've hung my corner wall cabinet doors and although they are aligned from the front with the neighbouring cupboards, the secondary d ...

Just Starting Out

1 reply

We’re installing a Think solid surface bench top. Unfortunately during delivery, the connectors were lost. Does anyone know which bolts are suitable? ...

Having an Impact

11 replies

Hey legends! Every DIY I have done since being part of this community has worked amazingly so I would love your help on the next one in our new hom ...