I want to expand the opening into my under stair area to access shelving easier. I’m not sure if the wall is load bearing and can’t afford a structura ...
i am in the middle of a kitchen renovation . Original plan was to remove the brick wall oven and replace with cabinets . But the wall is structural. I ...
what can I use to finish this panelling off on the end of this wall as I’m not panelling around the corner it’s just that wall? Thanks so much in adv ...
I am currently doing a kitchen reno and my plan was to paint the timber stained kitchen cupboards and island bench (and it took me forever and several ...
I would like a single 900 x 600 laminate benchtop to for on a standalone 900 wide base unit that is used for a circular 400mm sink. I'd prefer a lamin ...
Hello, I am looking at installing floor select hybrid 6mm blackbutt hybrid boards in my Kitchen and living rom area as they are one larger area.
a) ...
Hello, I need assistance with the specific wood/moulding product I would need from Bunnings to create panelling like this on a kitchen island. Thank ...
Hi Workshoppers,
I'm sheeting kitchen walls 3450 x 2400 high. In what direction should I place the sheets; vertically or horizontally? Also, what ty ...