I'm writing about my custom pool design in a separate post but felt this aspect needs a specific post for itself. I want to hide my pool pump (1.5hp) ...
Hi All, I've got a house with inexplicably no drainage down the high-side of the property, so that when it rains the water runs straight off the side- ...
Hi guys, I noticed there are holes in my gutters (one on the opposite end from the down pipe and another in the middle of the gutter) and these have c ...
Hello. I’m after some advice. I have an outdoor metal patio with single sheet metal roof. We would like to enclose a section with a room and the other ...
I have the great pleasure and challenge of designing the pool for the new house In our current place we have a small fibreglass pool which we didn't ...
Long time follower, first time poster. I would like to share my little iso project we started on Saturday (12/09/2020). The objective was to bring a ...
Hi, Long time reader, first time poster. After a bit of rain last night I noticed quite a bit of water coming in via the gap between the house and the ...
Hi,
I'm looking to paint my PVC downpipes. Need suggestions
1. paint to use - Water based or weather shield ?
2. Do i need to sand, apply undercoat ...
A pool blanket really works and helps keep the water clean and also warmer for longer which saves us having to turn the pool heater on. This is where ...
The first task is to sand back any flaking paint. I personally use a Ryobi 18V ONE+ Random Orbital Sander and highly recommend it as it is a great op ...