I have started planning out my deck build in my backyard.
Looking for advice if it safe to fix bearers sitting on a post on one side then directly fi ...
Hi Workshop team, I have an existing concrete slab that is not level around the outside as seen in images attached. I am seeking guidance on how best ...
Good Evening Folks
I would like to construct a small arbour say 2metres by 3 metres and 2 metres high. Posts say 90x90
This question is about creati ...
Hi,
I have a timber staircase with a lot of cracks on it. A friend of mine just mentioned it needs an urgent repair. What's your thoughts?
If I need t ...
I have a Monarch painters pole and I wonder if there is a Sponge/Microfibre indow Washer at Bunnings that will fit the thread on the pole.
I have be ...
Gday all, I’ve just started constructing the frame for a built in bbq and was wondering if Marine grade plywood would be suitable to finish off the ca ...
Hi All ,
I have a question regarding piles to bearers . The deck is 10 m x 4 m 400 mm high ( ground to top of deck ) bearers will be flush with jois ...
I would like to enquire about the most cost effective composite decking for an alfresco. I see the following makes are available: Trexdeck, Wooden, Mi ...
Hello!
I'm looking to rip up these old pavers and Re-level them as they currently have a bit of a slope to the house. And I'm concerned about draina ...
I also had to buy a small fridge as the two-way fridge was broken.
That’s all well and good @selva, but you had to get the old fridge out of the van ...
We have a stenciled concrete driveway and paths that, after several years, started to look weathered and in need of maintenance. To refresh its appear ...
After building our deck last year, it took me another year to finally start and finish our backyard. We have a small space available so I had to utili ...