Workshop
Start a discussion

Topics with Label: Tools and Materials

suley001
New Contributor
9 replies

hi guys I sealed my pond with crommelin pond sealer and a couple days later a part of it got a little wet I dried it up and left it for 7 days to cure ...

shevysingh
New Contributor
1 reply

          My proudest DIY to date…it took a lot of manual labour and even more patience but many lessons were learned along the way. First off wa ...

mjkworldwide
Budding Contributor
18 replies

Have promised the kids a tree house - and now have to deliver!The intent was always to build a platform rather than attach to the tree, however diggin ...

mich1972
Valued Contributor
7 replies

Hello Workshop Community Friends !! I would love to share with you all a colourful mixed hanging basket I planted up today. It can be hung up or as I’ ...

jjwill
New Contributor
3 replies

Hi, I'm about to build new raised vegie beds and will use the sienna treated pine sleepers. Some will need cutting, and it says in the Bunnings listin ...

mich1972
Valued Contributor
5 replies

    Good Morning Workshop Community Friends !!! Here is some inspiration for a Beginner who wants to grow some Edibles at home. A friend of mine wa ...

Cronny
New Contributor
6 replies

I have an Ozito 18 volt lithium blower and trimmer and the batteries indicate they are fully charged yet will only run the tool/s for 10-20 seconds an ...

domeman
Frequent Browser
1 reply

  I have a XU1 whipper snipper purchased from Bunnings but out of Warranty model XGT/018 The battery is not holding much charge and I would like to p ...

SeanDunne
Newbie
3 replies

Is there a way of clipping water pipes to the galvanised raised beds?

Chi88
New Contributor
3 replies

Hi there, I am planning to build a pergola and will be very appreciated if someone here can help, thanks in advance: my area is 2x6.5sqm,(overhang is ...

Emfrog
Junior Contributor
10 replies

HiI would like to know what the best whippersnipper is for ladies to use. I have a bad shoulder and struggle to pull chokes and cords to get engines s ...

Noyade
Trusted Contributor
13 replies

I always felt the 50 mm height on the vice ends on those foot operated vices too small. I'm in the process of making a poor man's version of the Trito ...

mich1972
Valued Contributor
17 replies

Watch this space friends as we convert this old bathtub into a beautiful Frog Pond  We have three small frog ponds in our garden and now it’s time ...

adamlin
Junior Contributor
14 replies
May

what would be the best weed killer for these on the photos? Thanks   

Smithrj
Junior Contributor
9 replies
May

Hi, I tried to change over the cutting blades in my Ozito Rapid Shredder. The screws holding the blades down were very difficult to loosen. After seve ...

hasansheikh
New Contributor
3 replies
May

Hi guys, Need some advice, I'm thinking to put a synthetic grass on side way and front yard. There are mostly lava rocks there. Do I have to remove ...

eemrun
Budding Contributor
8 replies
May

Newbie here. Have a colorbond fence but want to install one of the screens (Tuscan Path 1800x900mm rust geometric screen panel) a bit elevated off the ...

Shane
Experienced Contributor
12 replies
May

I’ve just bought my first house and need to invest in a lawn mower. We have an average sized backyard and there’s also some grass out the front but my ...

cbeal
Budding Browser
2 replies

What pump is best to run an Aquapro 12L Medium Rock Look Twin Cascade? I also have the Aquapro rock look pond (I think it is the 100L one). Ideally I ...

Justin12270
Budding Browser
5 replies

So we are looking at doing stepping stones down the side of our house. As you can see in the pic. Still need to level out the yard. But Our issue is s ...

Dan2
New Contributor
2 replies

Hi all, I want to put a mirror on the fence at the end of my deck - Is there a particular type of mirror to use if it is going to be outside? Tha ...

Robbybob8
Budding Contributor
8 replies

I have a lawn mower n I put it together n the handles r loose how do I fix them

lindasjohn
Budding Contributor
6 replies

Hi. Curious to find out what mulch you find best for weed control. I had newspaper and sugar cane mulch on top before. Trying to identify if I can do ...

chengjianer
Budding Contributor
8 replies

recently there are a lot of caterpillars on our edible plant leaves, so i bought that spray to see if it will work. did i buy the correct one? or is t ...