Workshop
Start a discussion

Topics with Label: Recycling and Upcycling

Jamespeter100
Established Contributor
1 reply

Plant containers and stands made from items that would otherwise go to the Bunnings waste box.  Tandy model 1. A web was crocheted from thin wire. So ...

Jamespeter100
Established Contributor
4 replies

Two Bunnings hanging baskets were joined together, and a stand was required. A pallet to the rescue. An ellipse was cut out, feet were added, paint a ...

Jamespeter100
Established Contributor
1 reply

Time to work out who is fastest, the concrete rabbit, or the wooden turtles. Two Turtles are made from decking timber from Bunnings, the middle one ...

nannyP
Newbie
2 replies

What sort of garden waste activator can I use on a large amount of garden waste to speed-up the composting process

timjeffries
Established Contributor
30 replies

MitchellM
Valued Contributor
23 replies

Currently at work we are installing frog ponds in schools around the local area. One of the challenges has been establishing plant life to provide sh ...

Maursie
New Contributor
18 replies

it all started with a large cleared area in my small backyard and the purchase of an "L" shaped Raised Garden bed.Make sure its levelDrill holes in 90 ...

mich1972
Super Contributor
19 replies

Morning friends. If you want to make a beautiful handmade Living Gift for someone special OR if you have a party at home coming up and you want to mak ...

LePallet
Super Contributor
11 replies

clydefrancis
New Contributor
4 replies

when repotting can the spent potting mix be recycled into a cold composting bin as a layer between each layer of organic material?

Poppop
Senior Contributor
5 replies

Adam_W
Valued Contributor
6 replies

Hi all & happy new DECADE!Well everything with our reno has slowed down a of late... damn you beastly budgets... but I've been fiddling away with a fe ...

Carol_Prime
Established Contributor
7 replies

rattle
Super Contributor
5 replies

G'day everyone. I'm not sure what to actually call this project, as it's based on a cold frame, but it's way bigger than the ones I usually see. ...

Oldfart
Junior Contributor
14 replies
May

kaylah_rose
Experienced Contributor
15 replies
May

Hi everyone! I have been away for a long time, but have something I think is exciting to share with you all Last weekend I finally got all my bit ...

rattle
Super Contributor
12 replies
May

G'day everyone. 1 Year ago, I had left over Colorbond from when our house was built and decided to make a raised garden bed with that and scrap wood. ...

Poppop
Senior Contributor
14 replies

moshiach77
New Contributor
26 replies

RodAndo
Junior Contributor
6 replies

Pancho
New Contributor
4 replies

Jamespeter100
Established Contributor
2 replies

    I have found another way of making wheels with the min number of saw cuts. Set the compound saw at 22.5 degrees, and over at say 45. The 22. ...

Yorky88
Super Contributor
3 replies

Jamespeter100
Established Contributor
11 replies