I have used the bracket with plugs and screws when I plunged the plastic plugs in the epoxy still soft, to make sure alignment and height were correc ...
Hi Alan, thanks but that's not suitable, the hole is as big a tennis ball or so, with a thin 1 cm of limewash plaster thickness.
I've made a sketch to ...
Great idea, no need to drill if I sink the plugs with screws and all (not tight, just to align holes). Later I’m going to to my local Bunnings to chec ...
New problem today, curtain rod bracket hanging loose, strange. Upon inspection I found the 2 screws with plugs hanging in the air. The holes must’v ...
Hi JacobZ.
The ash & embers do fall but they either sit on top of the colander and block some of the tiny passages (quite irrelevant to air flow), or ...
I have/had what I call “performance issues” . Never able to get enough airflow with all vents open, charcoal or briquettes same story: lid on and the ...
Hi, this is how I did a similar project at my place, using what Mitchell suggested but with turnbuckles to improve on the wire tension or to remove it ...
The Easter long weekend gave me that little bit of extra time I needed to add the finishing touches to my laundry reno. Planning started a couple o ...
I had a dull fence panel next to my shed which my daughter's bedroom looked out to, and I have thought about it for a while and settled for some green ...
Working from home is now the reality for many of us - including me. While it has it's pluses and minuses, it gets a lot better when you have a designa ...
Hi Alan, thanks but that's not suitable, the hole is as big a tennis ball or so, with a thin 1 cm of limewash plaster thickness.
I've made a sketch to ...
Great idea, no need to drill if I sink the plugs with screws and all (not tight, just to align holes). Later I’m going to to my local Bunnings to chec ...
Hi JacobZ.
The ash & embers do fall but they either sit on top of the colander and block some of the tiny passages (quite irrelevant to air flow), or ...
I have/had what I call “performance issues” . Never able to get enough airflow with all vents open, charcoal or briquettes same story: lid on and the ...
Hi, this is how I did a similar project at my place, using what Mitchell suggested but with turnbuckles to improve on the wire tension or to remove it ...
I’ll have a chat about it with my wife, good point.I have some netting I wanted to cut up in a shape that would make it easier to seal vermin out, but ...
