The belt and disc sander has no dust collection port. Best way to collect it?? Any ideas will be appreciated.
Solved! See most helpful response
sorry this is the only photo I am away at the moment
Thanks for the photo @Kidbuilder and welcome to the Bunnings Workshop community. It's good to have you with us.
Normally I would ask the ever-knowledgable @MitchellMc to assist, but he is taking a well-earned break at the moment.
Feel free to post anytime you have something to share with the community or need a hand with a project. We're here to help.
It looks like a bit of metal or plastic work may be required.
Here is a Youtube link to one that is similar but has a dust collection system on it.
Maybe you can use that as an inspiration for ideas on how to design and make a free-standing unit for yours.
No there is not I am pretty sure but how would it collect the dust from the disc part???
There are two ports in the image above. Your machine has no shroud around the vertical disc - so that's a problem in itself. I was just hoping there may be a port under the belt. Clearly there isn't - and you've read the manual.
So we need to design and make something....