How to fix cracked bricks?

[otnimus1]

Hi community, my question isn't particularly related to garage but it happens that I'm replacing garage door.

I will get my garage door replaced and I just noticed that there are some cracks on the brick where the door is attached to. I hope the installer will make the right judgement on what to do but I would like to get your opinion for my own education.

As shown in the photo, there are some cracks on the bricks as marked in red. I know the bracket will be replaced but I don't know if any of existing hole will be used. Regardless the bolt will be attached on new hole or existing hole, do I need to do something about the cracks? If so, what should I do?

Would it do any good/difference if I patch/fill the hole with Ramset UltraFix? Or is there any other products that is more suitable for this? Thank you.

[JacobZ]

Hi @otnimus1,

The cracking through the mortar, combined with the broken bricks you can see behind the garage door's attachment bracket, implies there is some fairly significant movement happening here.

Ultimately, the brick isn't just supporting the garage door; it is holding up the roof, and this level of damage to a brick wall is a bit concerning.

I wouldn't be looking at a product to sure things up, I'd be contacting a bricklayer or builder with bricklaying experience, to have them replace the broken bricks and check that the mortar is still sound. 

Allow me to tag our knowledgeable members @Dave-1, @R4addZ and @Nailbag to see what they think.

Jacob

[otnimus1]

Thanks for tagging other members @JacobZ I would be keen to hear their opinions. My issue are the timing between the bricklayer to do their job and the garage door being installed, since the old door is currently still intact.