I want to remove an existing sliding door and replace it with a wider one which extends further across our balcony.
There is a gap of plasterboard a ...
Hi, I am planning to do the wall panel design like the attached photo.
I am using 60mm X 11mm MDF boards(https://www.bunnings.com.au/66-x-11mm-5-4m-m ...
Hi Guys, I am planning to build a dining table. I am very new to wood working and this is my first project ever. I have done some research and have pl ...
DIY July!
We had been wanting to do wainscoting for a while but were unsure where to start. Thankfully it was so simple with the Bunnings team's hel ...
My wife has bought a full Murphy bed kit, all except for the timber bits. Attached is the overall look of the bed from their Instruction booklet.That ...
I'm looking to add some shelves to my empty built-in wardrobe. I'm trying to keep cost down so plan to use melamine shelves but don't know how I shoul ...
Hi there,
How would I go about building something like this without drilling into the floor? I would like to be able to remove it if I change my mi ...
Hello all, have this paint peeling off from the hall way/living area ceiling. The house is from the 70s and the bedrooms' ceilings are just fine. The ...