Trying to add 4 supporting posts of a new pergola onto the existing decking, current decking is around 400mm off the ground. Are all posts need to be ...
I have started planning out my deck build in my backyard.
Looking for advice if it safe to fix bearers sitting on a post on one side then directly fi ...
Hi Workshop team, I have an existing concrete slab that is not level around the outside as seen in images attached. I am seeking guidance on how best ...
I have a Monarch painters pole and I wonder if there is a Sponge/Microfibre indow Washer at Bunnings that will fit the thread on the pole.
I have be ...
My son installed a new black protector gate to keep my dog in. I now find she is jumping it, if she sees a cat or a bush turkey.
It was a lot of work ...
Hello, in line with the few posts I have seen about weeds in lawns. Can I ask if you could look at these weeds (not sure what they are specifically ...
Good Evening Folks
I would like to construct a small arbour say 2metres by 3 metres and 2 metres high. Posts say 90x90
This question is about creati ...
Hi team
complete newbie at concrete but first time a charm right lol
So I'm looking at a diy concrete slab.. bearing loading of about 3-5T for a car ...
I believe mixing cements & sands (1:4) and bitumen together as a gap filler mixture, could be used to fill such gaps, that will provide hardness as w ...
We recently had the fence reinstalled. Unfortunately there is now a gap between the fence and our neighbour can see through to the whole of our backga ...
Hi,
I'm tackling what hopefully will not be too big of an ask for my skillset. I have a 25 M long blueboard rendered front fence that is in dire need ...
We have a stenciled concrete driveway and paths that, after several years, started to look weathered and in need of maintenance. To refresh its appear ...
After building our deck last year, it took me another year to finally start and finish our backyard. We have a small space available so I had to utili ...