Hi all, we accidently broke the down pipe. Photo as shown. We would like to diy it, but what other materials would we need to get other than the pvc p ...
Thanks in advance for any help with this. I have read a lot of the very helpful existing conversations about insulating deck/patio roofs and think I h ...
Hi, If I was using 90x45 Treated Pine to build a decking frame (no decking as using WPC decking), what size type screws would I use? I also need to u ...
I'm looking to build some relatively low traffic stairs for the side of our house, total rise is approx 600mm, width around 1200-1300mm.
The Peak P ...
Hi, I am looking to update my front stairs and want to build a landing level with the doorway that covers up the old concrete stairs and then add some ...
I want to build a timber ramp over a stormwater pipe that crosses a concrete pathway next to the house. The ramp needs to be 850mm wide (it is not pos ...
I plan to use Jack 300mm x 8m Garden Edging - Bunnings Australia to block the bottom gap, but I am unsure how to install it. Do I need to screw it to ...
Hi! I'm needing to replace some rotting weatherboards prior to painting, and have what I believe is some type of metal flashing between the bottom we ...
I want to make a beach/picnic table with foldable or screwed legs that’s easy to put together and take apart at the beach etc, I’m struggling to find ...
Hi,
We recently purchased the house. Its patio needs some TLC. Being a newbie, I am not sure
Should we sand the deck before oiling it or just clean ...
I renovated my 1994 Jayco Sprite from top to bottom, including resealing every seam on the exterior, replacing all external fastenings and attachments ...
We have a stenciled concrete driveway and paths that, after several years, started to look weathered and in need of maintenance. To refresh its appear ...
After building our deck last year, it took me another year to finally start and finish our backyard. We have a small space available so I had to utili ...