Share
I am thinking about putting some shelves on the wall adjacent to the stairs. Any suggestions will be appreciated.
I have uploaded the picture of the stairs wall i have got and the picture of what i am thinking to make. Don’t need that much shelf just some will do.
Hi @Kapisaaj,
If you want to create shelf niches in a timber-framed wall without making major structural changes, the best approach is to work within the existing wall cavities between the studs. These studs are typically spaced 450mm or 600mm apart, which gives you a decent width for each shelf. As you start exploring the wall, you’ll likely come across noggins, which are horizontal pieces of timber between the studs. These can sometimes be repositioned to make space for your shelves if needed.
The first step would be to use a stud finder to locate all the studs and noggins behind the plasterboard, marking them as you go. This will give you a clear picture of what’s behind the wall and help you plan your shelf layout to minimise any structural changes. Ideally, you’ll design your shelves around the existing framework rather than cutting through it, as that keeps the project simple and avoids compromising the wall’s integrity. Here's a helpful guide: How to use a stud finder.
The wall shown in your inspiration photo is likely non-structural, which is why it could be divided so freely. Standard internal walls, however, contain framing that can’t be removed without affecting the structure. You should still be able to create several attractive niches across the area if you design them around those constraints. The depth of your shelves will depend on the type of wall you’re dealing with. If it’s a typical stud wall with another room behind it, your shelves might only be about 100mm deep. To start, map out the stud and noggin locations, sketch your preferred shelf layout, and you’ll have a much clearer idea of what’s feasible before cutting into the wall.
Once you have a clearer picture of the available space, we can delve more in-depth into how to go about creating the niches. Essentially, you'll cut out the plasterboard within the chosen cavity space, taking care not to damage any wiring or pipes. If a noggin is in the way, you can cut and reposition it slightly higher or lower to make room for the niche. Once the opening is clear, frame the inside edges with timber to form a solid box structure, then line it with plasterboard or MDF for a neat finish. Finally, patch, sand, and paint to match the wall, or add trim for a decorative touch.
Let me mention @EleventhCoastal, @Renowayoflife and @JoeAzza to see if they have any thoughts.
Please let me know if you have any questions.
Mitchell
