Workshop
Ask a question

Topics with Label: Painting

EllaAnderson79
Just Starting Out
3 replies

     I have just removed the drawer-fronts and door-fronts from our kitchen cabinets. They were previously vinyl-wrapped, but I have removed the vi ...

greg303
Just Starting Out
1 reply

Hi, I've recently knocked down walls and channel cabling, which is now rendered   . How best to prepare these areas for painting so that it better ...

BrittC
Just Starting Out
1 reply

  Looking at a cheap kitchen renovation. Been priced for a glass splash back or wondering if I get new tiles and place them myself? The kitchen cabin ...

kateaw
Getting Established
3 replies

Hi, We are up to the kitchen reno planning and trying to decide what we can do ourselves vs what we hire someone to do for us.We ideally want to cha ...

Cherry
Getting Established
6 replies

We have a 24yrold vinyl wrap kitchen which has seen better days! can’t afford a new kitchen, so have removed remaining vinyl wrap (not much as it crac ...

Kintiq
Cultivating a Following
12 replies

Microwave touchup paint Black- What to use

runningteezy
Finding My Feet
5 replies

Hello! I am looking for advice on how to level this part of the bench top so I can paint it with the Dulux renovation range or Rust-Oleum counter top ...

jpaige
Just Starting Out
1 reply

Through out my house all my cupboards have this wood and I don’t know how to make it better with out replacing them. Please help?    

Snakeytail
Getting Established
5 replies

So I am spraying my cabinet doors with a little handheld Wagner sprayer (really wish I had upgraded for this project!) I was getting pretty decent res ...

Sarahgibson
Finding My Feet
3 replies

For my Kitchen bench I have recently purchased " Specrite 2200 x 600 x 26mm Golden Teak Acacia Multi Use Panel" which is pre-oiled. On their website ...

maggie36
Finding My Feet
6 replies

Have made a wooden table, sealed and prepared it according to instructions, pored Feast Watson glass finish. First coat we had lots of bubbles, burst ...

daniknight4
Becoming a Leader
2 replies

I had been looking at my pantry door for a while and thinking, "This is not good!" I made a decision to make it over and I had a few ideas but, in the ...

Lilbug
Getting Established
9 replies

Terrible finish on the primer coat. Very 'orange peel' like effect. We are very disappointed with this result, but I am concerned it is a prep issue. ...

jonesyjones
Just Starting Out
1 reply

cleaning & removing Rust from metal facia boards under the gutter

rachypachy92
Just Starting Out
1 reply

I have some missing laminate spots on my kitchen cupboards, the parts that are lifted will be glued, then will be filled, sanded. I need the right pai ...

Lori23
Finding My Feet
8 replies

Hi, I have a very old kitchen which was put in 25 years ago. It has served its. Life span except the laminate is now starting to lift from cabinet d ...

RnB
Just Starting Out
2 replies

I would appreciate any advice please. I’ve just finished refreshing my kitchen laminate benches and splash back tiles with Dulux Renovations range. Ti ...

benji9
Just Starting Out
1 reply

does anyone have advice for how to fix this wall paint

Anna_G
Getting Established
1 reply

Hi, I have painted our kitchen cabinets in the Dulux renovation range and used the renovation range clear coat in satin on half the cabinets which ...

DIYKM
Just Starting Out
1 reply

Hi I'd like to change the colour of my indoor concrete dining table. I thought about spray painting the table top and then applying a matt sealer over ...

mazandchris
Growing in Experience
2 replies

      We have just made a beautiful oak flooring swivel table for our shipping container shak! However the table has yellowed with the stain which ...

savi
Just Starting Out
1 reply

Hi everyone, I recently bought a dining table that was advertised as ‘natural,’ but the tabletop looks more yellow than natural. I’d like to change th ...

Serendipity
Finding My Feet
3 replies

What laquer / top coat do I need for DIY shou sago ban table I’ve made. Don’t want it glossy.

ashnagisa
Just Starting Out
1 reply

  I’ve over sanded my wooden table and now the patches really stand out. Is there a way to fix this?