Workshop
Start a discussion

Topics with Label: Furniture

belinda66
Budding Browser
3 replies

  This table had rounded edges and I wanted to square the edges and change the colour. The edges were routed and a boarder was added. I sanded the ...

spacepolitix
New Contributor
10 replies

Hello,This is my first ever DIY furniture item. I want a cabinet that can fit a dishwasher and an oven, but there wasn't anything cheap.I've attached ...

Sugar
Established Contributor
5 replies

Hi folks, We are wanting to do some work on our kitchen. Following are the things we would like to do. This is going to be one at a time. A. Changing ...

MoKarim
New Contributor
2 replies

Hello, We bought Alfresco Prestige Engineered Stone approximately a year ago; unfortunately, we have lost the assembly instructions. Anyone could se ...

EdwardW
Junior Contributor
3 replies

When I got tired of having various size spice jars piling up in the kitchen cabinet, I decide to make this drawer unit which sits inside of the cabine ...

Stuardo
Experienced Contributor
14 replies

I wanted a Buffet for the dining room but couldn't find one the right size. This old chest of drawers was close to the size so I converted it from 3 l ...

dean
Junior Contributor
15 replies

This is my latest creation, again created with spotted gum. I have left this one a little more rustic, leaving some bumps and inconsistencies. Once we ...

sowmyao
Newbie
1 reply

I would like to do makeover of our furniture. It is currently wooden colour though out I would like to have dark walnut color on top and legs with whi ...

Karlster69
New Contributor
6 replies

I recently completed this kitchen island project base on an Ultimate Storage 42" 7 draw matt black tool trolley. The ideal was to take the concept of ...

kathuriamukesh
New Contributor
2 replies

Hi Guys, Need some help with deciding screws. I am trying to put a IKEA METOD wall mount cabinet in our kitchen. It comes with a railing and the c ...

Falcon
Newbie
2 replies

Hi There,Can someone please advise how to reduce the height of these brand new bar stools?We bought these stools recently and didn't check the height ...

Chaks_DIY
Super Contributor
5 replies

Built-in wine rack. Hi all. Spent some time this weekend making some built in some custom cabinetry to fit into the awkward space in our kitchen to ma ...

diy_ujjaval
Junior Contributor
1 reply

Hello, just faced with this challenge to fix the old style bench-top. It's bulging from edges - and tore off at a placeWhat can I do about it - any ex ...

MP2020
Budding Contributor
5 replies

Hi. We are looking to give our tired dining table a Hampton style makeover. We'd appreciate any advice on: 1) What best waterbased primer and paint to ...

linburnlane
New Contributor
3 replies

I have an old Parker dining table set, great bones but the chairs are covered in ugly yellow vinyl. Apart from trying to recover in fabric, is it poss ...

stella
New Contributor
1 reply

  

MagicPossum
New Contributor
2 replies

Not sure if this where I should ask for advice, but I'm looking to replace doors and drawers in built in cupboards in a home office. So I guess kitche ...

kits
New Contributor
3 replies

 Hello! Long story short, I need to fill these gaps between panels of my kitchen counter. It hasn’t been treated yet. I’m leaning towards wood putty b ...

farrspray1
New Contributor
8 replies

Can someone please advise whether the Practa 2 door cabinet has a space allowance down the bottom at the back for the cabinet to sit flush against the ...

DexterOz
Established Contributor
14 replies

I am trying to install my rangehood but when i took out my old rangehood i can notice the new rangehood has four screw slots on top roof. But as my ki ...

uses
Budding Browser
3 replies

Hi  just wondering how people source replacement or extra shelves for kaboodle cabinetry. I wrongly assumed that being a flexible modular system you ...

Dannik
New Contributor
1 reply

Hi!I’m seeking advice of how to temporarily fix a kitchen cabinet with water damage. I have read some suggestions on the use of adhesive, clamps and w ...

LePallet
Super Contributor
4 replies
May

A good mate of mine pulled these facia beams off an old house and asked if I could turn them into a dining table.The glue up was challenging with the ...

Thepinkmink
New Contributor
4 replies
May

Does anyone have an idea how I can make a bar stool height slim chair that will elevate my feet and allows the back to slightly recline safely? Some ...