Workshop
Start a discussion

Topics with Label: Recycling and Upcycling

vica
Experienced Contributor
7 replies

  Hi, mates ! This is my dust basket . Any advice help to improve it ? Thank you ! Vica

belinda66
Budding Browser
3 replies

  This table had rounded edges and I wanted to square the edges and change the colour. The edges were routed and a boarder was added. I sanded the ...

Stuardo
Experienced Contributor
14 replies

I wanted a Buffet for the dining room but couldn't find one the right size. This old chest of drawers was close to the size so I converted it from 3 l ...

dean
Junior Contributor
15 replies

This is my latest creation, again created with spotted gum. I have left this one a little more rustic, leaving some bumps and inconsistencies. Once we ...

LePallet
Super Contributor
4 replies
May

A good mate of mine pulled these facia beams off an old house and asked if I could turn them into a dining table.The glue up was challenging with the ...

prettyliving
Super Contributor
6 replies

            Last week hubby and I filled a blank wall in our kitchen by putting up some shelves made of beautiful recycled timber. I sanded the ...

moshiach77
New Contributor
6 replies

I made this table from some old hardwood boards I had.

leon3758
New Contributor
1 reply

AnitaH25
Established Contributor
4 replies

I was asked if I could make one of these for a friend. She had seen one but It came with a hefty price tag for what it was. She wanted a board that ...

Yorky88
Super Contributor

Parks
Budding Contributor

Kellie
Super Contributor

Anyone seen or own a recycled glass kitchen benchtop? I hadn't heard of them before but when browsing today stumbled across it. Could look beautiful ...

AndrewJones
Experienced Contributor
1 reply