Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Bathroom and Laundry

Help for bathroom and laundry renovation projects
johnrajkovic
Just Starting Out
34 replies

Can you please send me the install manual for the Gorilla 2.1-3.05 attic ladder? thanks

Georgialmc
Community Newcomer

Hi, I am updating my bathroom and have laid a floor of James Hardie Secura flooring over existing floor boards. The spec sheet recommends James Hardi ...

melissalee
Just Starting Out
1 reply

Hello, my towel rail kept falling down, so I removed it by unscrewing the grub screws each side. It is also covered in superglue where someone previou ...

clover-grove
Just Starting Out
6 replies

I have a back room / mud room type of set up. The flooring is structaflor yellow tongue. I had planned to lay Hardie ceramic tile underlay and tile ov ...

alwin
Just Starting Out
3 replies

Hi everyone, I bought a Mondella Resonance chrome pin lever wall top assembly with 1/4 turn ceramic disc valves installed in my shower (hot and cold ...

MichaelaG
Finding My Feet
14 replies

Hi everyone, This is my first post. I am about to start a bathroom renovation where I am striping out everything except the ceiling and bathtub. The ...

maync
Getting Established
8 replies

Basically aiming for a DIY shower de-and re-instal. Some advice would really be appreciated for this DIY project. Things to watch out for. First I'm p ...

alexreed092
Getting Established
2 replies

Hi I need to replace these rusty bathroom door hinges and have two questions: -What's the best way to remove them/what tools do I need? -What sort o ...

nam599
Just Starting Out
3 replies

My shower head is leaking even after turning the water off, so I am trying to replace the washer which tap spanner's size should I use to take off t ...

danyopan
Just Starting Out
4 replies

      Hi team! I love reading your advice and ideas with others in the community, and I have an idea for a renovation of my house that I would lo ...

tzeherng
Just Starting Out
3 replies

Hi, I'm very new to this community. Recently a mechanism that does the toilet flushing lever has broken. Picture attached is the same toilet in anothe ...

Maryindi
Just Starting Out
3 replies

I am trying to fix my bathroom sink dripping tap but cannot get the tap off i have unscrewed the H on top but then can only unscrew the handle to a po ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects