Building and Construction

After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...

Hi, I am installing a channel drain and using the EasyDRAIN Standard Channel that has a female and male end. I have installed a few connected to a sli ...

Would like suggestions on people would use as a privacy screen plus insect in front of the roller door  also still allow function of roller door

We are installing 6 100mm * 2400mm high posts and connecting them using 90mm *45mm*3000mm beams to spread our grapevines. However, after installing P ...

I have standard project home bathroom mirrors that I would like to add a wooden frame to. Unfortunately, I couldn't find affordable corner clamps at B ...

    Planning our laundry, can the door go on the blind corner base cabinet as shown in the pic from the designer? If so, how? (As in, where do the h ...

My next question is that I want to create a raised garden bed area. It is currently just sand from our new build. What would be the best ground type ...

I want to remove an existing sliding door and replace it with a wider one which extends further across our balcony. There is a gap of plasterboard a ...

      Hey guys, I am planning to build some backdoor steps, the platform is 800mm in height and i plan to use 2x Peak Black 4 Tread Steel Stair St ...

I am planning a shed to studio conversion of our old, but well built timber-framed metal shed. Size of the shed is 6.4 x 3.4m with steel frame and con ...

  How do you go about straightening an old timber framed wall, ready for plaster? I don’t think it’s out that much, but how can you tell it’s strai ...