I am restoring an old table which has a really unsmooth tabletop, so I started with sanding. However, after 5 passes with P80 using my orbital sander, ...
Hi there, After some advice on how to repair (if possible) our bowed tv unit. The unit is meant to support twice the weight of the tv, however, the ...
I recently installed 6 x prempanel black oak acoustic panels in my theatre/office and it looks great but the smell it gives off gives me a headache, l ...
Have a standard door leading out to the garage, the door is latching but the lock is not locking.
I think there is a misalignment with the strike p ...
Hey All,
I have a couple of cup sized holes in my internal plastered brick wall in the living room. It was to conceal a cable in the wall, but now w ...
As shown in the image, I have 3 ceiling cracks. These cracks run in between ceiling joists that are spaced 600mm. There is a noggin behind the middle ...
Hi,
I used plywood for my wardrobe because it needs to hold the weight of vertical bars. Just wondering for the seams can I use Selleys Spakfilla Rapi ...
Hi, I have just moved into my new (old) villa and want to hang some pictures. The units were built in the 60s and renovated at various times. There ar ...