Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Bathroom and Laundry

Help for bathroom and laundry renovation projects
fraz
Community Newcomer

Can you connect the washing machine hot and cold pipe to the same wall outlets for the vanity hot and cold. If so how is this done, do you have a pho ...

NJ1
Community Newcomer

We replaced a rail showerhead (because it's little plastic nubbins were busting open) with this bad boy: https://www.bunnings.com.au/flexispray-self-c ...

jahmeiqua
Community Newcomer
1 reply

Hello, I need help with fixing my Water Tap that is connected to the laundry water. It has come off the wall. Maybe due to rust, i have no idea.. I ju ...

diy_hausdesigns
Amassing an Audience
4 replies

The project was to renovate the existing laundry into a modern combined laundry and wash basin facility for the seperate toilet in our home. Initial ...

Taffy1
Community Newcomer
1 reply

I am trying to replace tap washers on a basin tap and bath tap - both early 1980's vintage I estimate. However I can't loosen the tap spindles despi ...

SarahK1996
Cultivating a Following
1 reply

We have a toilet that seems to be of the ‘watermark’ brand. Every time after we flush it, it continues to drip into the toilet bowl. I’ve turned off t ...

alex_89
Just Starting Out
4 replies

Hello. We plan on installing an inset bath (pressed steel) in the back of this bathroom (where there is no floor / joists). The plumber has roughed-in ...

sud
Just Starting Out
1 reply

hi, I am converting an existing bedroom into ensuite. Ensuite is going to be tiled from floor to ceiling. I intend to replace existing ceiling's plast ...

philplant
Just Starting Out
1 reply

hi I have a sticky cold tap just rwcently it turns on fine but when open the tap up more it sticks and moves slowly and the pressure decreases any adv ...

Teegs95
Just Starting Out
5 replies

hi, Im changing my shower taps over from old school ones to mondella cadenza curvy chic ones. My existing taps sat far back into the wall so the new ...

rennochap23
Just Starting Out
5 replies

I am renovating my laundry and have had electricians chasing cable (in conduit) in the wall. What is the best material to fill in the holes left aro ...

JohnA-007
Just Starting Out
6 replies

I will be laying ceramic tile underlay on top of leveller compound. Any suggestion and advice will be greatly appreciated. Thank you. PS: upstairs bat ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects

  • 14 Likes
  • 13 Likes
  • 11 Likes
  • 9 Likes
  • 7 Likes
  • 6 Likes