G'day folks,
I'm wanting to replace my basin spout and just wanted to go about it the best way.
From what I've read, you remove the nut securing the ...
Hi All, I have purchased the Kinetic spout and handle repair kit as I thought these required the special nut with 2 grooves spanner to remove - but ...
Hi, I am renovating our bathroom. We are going to have fully tiled walls. I have removed the old 1/3 tiled wall and it has removed some of the previou ...
Hi, I attempted to alter the functionality of a bathroom door lock by adding an anti lock-out function. It’s a Legge 900 series Mortice lock, so all i ...
It was time to update our Guest Toilet. Had few inspirations from Pinterest. Decided to try out panelling wall décor. Measured the toilet room size a ...
I have recently re-grouted shower floor, however when removing the grout I chipped the tiles in a couple areas. The chips are small but do stand out. ...
I have a new build and there is a smell coming from the bathroom vanity. When I look at how the A/c Condensate drainage is connected to the waste fro ...
I’m working with a compact 1600 mm x 1600 mm ensuite, space is tight to every cm is proving to mean a big difference. I'm looking to gain an extra 30– ...
Hi guys
I need to prepare a box kick board like shown in the image below (white one). I bought his and its height is 250mm. This is making my vanity s ...
Hi,
My bathroom mixer tap (vanity unit) started to leak quite a lot. I have replaced various washers in taps before but never in a mixer tap. I found ...