Workshop
Start a discussion

Topics with Label: Recycling and Upcycling

Poppop
Senior Contributor
9 replies

Yongman
Budding Browser
2 replies

I got so nice dress-shoes from a salvo's, but the soul is quite worn and I’m wondering if I were to glue a thin rubber sheet to the soul if that would ...

Yorky88
Super Contributor
7 replies

Tara86
Super Contributor
3 replies

Firstly I’d like to thank @Yorky88 for your helpful advice answering my long list of questions!! Plus all the other posts showing their DIY Cubby’s - ...

sandy_d
Junior Contributor
20 replies
May

I originally started this outdoor area to enjoy Easter with the family at my place. It suddenly became a space where we would honour and cherish my mu ...

Former Workshop member
Former Workshop member
N/A
4 replies
May

     

Former Workshop member
Former Workshop member
N/A
6 replies
May

    Makes a good planter.

Centrepiecefurn
Budding Contributor
6 replies

I wanted to cover the boring gal walls in my outdoor area quick & easily rather than just paint. I liquid nailed & screwed rough sawn treated 150mm fe ...

abhayks
Junior Contributor
8 replies

Hi, Just built a chair from pallets wood. Gave me a lot of confidence. I'm sure that it has lots of technical issues, but hey ! I built it myself and ...

Nham
Established Contributor
2 replies

  Hi everyone and happy easter! I built another version of my "Computer desk build" post for the outside patio area. We needed a table to replace ...

abhayks
Junior Contributor
4 replies

  Hi all, I was severely lacking a place to work, so when rains ( western sydney) stopped me totally from working on the wet floor; I decided enough ...

GeoffB
Junior Contributor
3 replies

This is a pair of Barn Doors I made for a local Café in Pakenham. I used 9mm ply as a backing and built up the doors using recycled Baltic pine weathe ...

Peggers
Experienced Contributor
29 replies

Renovated an old 70s Millard caravan from scratch with a Penguin Classics book theme. Hard work, but well worth the results of a Xmas Holiday proje ...

Briggsy
Junior Contributor
7 replies

LePallet
Super Contributor
6 replies

All materials are recycled and Have been made into this large outdoor bench seat measuring at 2.3m long, 750mm high, 800mmm wide with the choice of a ...

Yorky88
Super Contributor
14 replies

Yorky88
Super Contributor
1 reply

New service bar I built out of pallets and form ply

kaylah_rose
Experienced Contributor
57 replies

I was recently researching vertical and herb garden ideas. For myself there are two things that make or break my decision to undergo a project. 1. Is ...

LePallet
Super Contributor
14 replies

Demo
Junior Contributor
4 replies

Super66
Experienced Contributor
5 replies

I have just finished making the Wine Barrel cupboard for up the backyard.I built it so I can store thing in it for the fire pit and wine glass ect.I o ...

LePallet
Super Contributor
12 replies

   

KevinMall
Established Contributor
2 replies

hi all, I have seen quite a few really good ideas to re-use. timbers pallets however given I live in Qld termites/white ants are a problem for outdoo ...

cadsman
Established Contributor
2 replies

Latest project just completed, Bunnings merbau decking and ply, left over cover sheets of colorbond and a bit of pine and hardwood framing. Clear glos ...