Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Living and Bedroom

Help for living room and bedroom projects
ianthom
Just Starting Out
2 replies

I want to remove an existing sliding door and replace it with a wider one which extends further across our balcony. There is a gap of plasterboard a ...

leahnelly
Just Starting Out
1 reply

How would I be able to build a 3 in 1 cot for my special needs daughter

mahabalesh
Just Starting Out
3 replies

Hi, I am planning to do the wall panel design like the attached photo. I am using 60mm X 11mm MDF boards(https://www.bunnings.com.au/66-x-11mm-5-4m-m ...

akhilsingh
Finding My Feet
2 replies

Hi Guys, I am planning to build a dining table. I am very new to wood working and this is my first project ever. I have done some research and have pl ...

martink7
Getting Established
5 replies

DIY July! We had been wanting to do wainscoting for a while but were unsure where to start. Thankfully it was so simple with the Bunnings team's hel ...

ilox
Growing in Experience
12 replies

My wife has bought a full Murphy bed kit, all except for the timber bits. Attached is the overall look of the bed from their Instruction booklet.That ...

dcjames55
Finding My Feet
10 replies

I'm looking to add some shelves to my empty built-in wardrobe. I'm trying to keep cost down so plan to use melamine shelves but don't know how I shoul ...

AussieBeth
Finding My Feet
6 replies

Hi all, We're creating a home office in a small bedroom and want to install wall shelves (see chicken scratch sketch below for context). We have o ...

Shotime
Growing in Experience
1 reply

Hi there, How would I go about building something like this without drilling into the floor? I would like to be able to remove it if I change my mi ...

TheRenoDad
Having an Impact
22 replies

Simple to build and made with materials all sourced from my local Bunnings. See below for the before photo of this project and keep reading to fi ...

chandra_r381
Just Starting Out
1 reply

Planning to buy 3ft tank which holds almost 90L water. please suggest the items and tools to make the stand which can hold the weight.

JoshKing
Finding My Feet
5 replies

Hello all, have this paint peeling off from the hall way/living area ceiling. The house is from the 70s and the bedrooms' ceilings are just fine. The ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects