Purchased a second hand change table off my local marketplace getting ready for an addition to the family. Sanded it back, primed it with British 3 in ...
I absolutely adore the whole rattan furniture vibe, but couldn't find *exactly* what I wanted in the shops to fit my measly budget. I bought a new, ba ...
I just got an antique cupboard from Facebook Marketplace & when I put a little bit of weight in the middle of the cupboard a crack appeared.I was h ...
These were the two round ends of an old dressing table which required quite a bit of carpentry to modify and repair. Lots of sanding then treated sid ...
When you collect old furniture you inevitably end up with old mirrors. What to do ..... I did these. Sanding, undercoating and some op shop books, c ...
This big boy was a massive job. Lucky my husband in good at carpentry! Early days of my interest and probably too much but it came back n to life ni ...
Again, this was on old piece picked up for not much. Lots of sanding, good sealer undercoat and then 3 topcoats. Drawers lined with a dramatic fabric ...
I thought I would share a pallet coffee table I built over my weekend. I used a very similar process to the D.I.Y. article How to build a simple co ...
The process for colour matching is actually not that difficult. In order to get an accurate or similar shade of colour, it will require a paint sampl ...
Why join the Bunnings Workshop community?
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects