Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Whole of House

CSParnell
Experienced Contributor
25 replies

Hi all, I thought it may he good to have a feed where we could share any tips and tricks to do with any of the Grid Connect Range being Arlec, Deta, V ...

CSParnell
Experienced Contributor
6 replies

So you've bought a heap of Grid Connect gear like me but your security cameras are Swann and then on trip to Bunnings you notice so bargin priced Wiz ...

Retired Team Member JaneK
Retired Team Member
4 replies

After reading this article on where to start creating a smart home from the Bunnings website, I'm curious about whether any Bunnings Workshop communit ...

n860cr
Junior Contributor
28 replies

I'm looking to pickup up a whole lot of these DETA smart switches (https://www.bunnings.com.au/deta-smart-switch-mechanism_p0346912) as they don't nee ...

CSParnell
Experienced Contributor
18 replies

Hi All, I thought I would share this product as apart of the Grid Connect system I am running in my house, being new to the market and their first mod ...

CSParnell
Experienced Contributor
8 replies

So you head into your local Bunnings to grab a replacement globe and am smacked in the face by a dedicated isle of light globes and your confidence of ...

Prof
Valued Contributor
99 replies

Firstly to clarify, "a dedicated home theatre" means that the room you will be using will only be used for watching movies and perhaps some TV.. A ...

CSParnell
Experienced Contributor
12 replies

So your in need for a TV cable and your heading into your local Bunnings to pick one up but before you grab your keys there's a few things that a wort ...

CSParnell
Experienced Contributor
4 replies

You may have seen these stickers around your local Bunnings electrical department and thought "oh they are just covering themselves". But it is so im ...

Nham
Experienced Contributor
7 replies

Hi everyone, For some time now, we have wanted to install some home video surveillance around our home. I wanted to share my experience with the co ...

CSParnell
Experienced Contributor
23 replies

Hi Team, I am trying to figure out if there is a work around for the following automation without receiving notification of failure to execute when ...

CSParnell
Experienced Contributor
4 replies

I have been using a bedside lamp with an Arlec Grid Connect globe automated to turn on for a minute on early mornings for work though the issue being ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects