All the door frames in our 1960's apartment are metal. I recently removed some shelving which was anchored on to one of these door frames and it obvio ...
To replace the mesh screen, as per discussion comments, it is necessary to drill out the pop rivets. After replacing the mesh, how do you reaffix th ...
Novice painter here,used Tauberman ultimate enamel paint to repaint my architraves and door frames however I found that there were these thick deposit ...
Hey all,
My house has cypress pine floorboards that have seen better days - Pic attached. The floor itself looks in pretty decent shape, few little ...
Hello!I need to replace some bits of my balustrade, some of the white lower parts are very old and are rotting, all the green including the top rail a ...
I recently bought a house and (what I'm assuming is) the polyurethane layer on the floor in the study is peeling. The study is quite small ~8m^2 and ...
Hi Everyone
i have this vintage table I have painted in a chalk paint. Obviously I have waited overnight for the paint to set and then I pushed the dr ...
I have the ones with the beaded cord at one end. A combination of blockout and some light filtering/transparent. I have read they can and they can not ...
The security mesh on my screen door needs replacing. I don’t know how to remove the pop rivets and what sort of mesh I should get to replace the damag ...
We wanted to add a pocket door to our home; we recently added an extension, where we added the bedrooms. We wanted to design a door to create some pri ...