This widget could not be displayed.
Hi there, I'm looking at removing this bath and putting in a walk in shower instead. Pretty simple, except for the window. I need ideas on how to keep ...
I am looking to build a front fence on my property using block and aluminium slat panels.
the block work will be 600x600 pillars 8 courses high with s ...
We have had pool fence repositioned and now we need to remove posts that have been very securily concreted in! My husband is trying to do this with a ...
Hi, I am planning to do the wall panel design like the attached photo. I am using 60mm X 11mm MDF boards(https://www.bunnings.com.au/66-x-11mm-5-4m-mo ...
shumm
Growing in Experience
Hi team, any advise on how to conceal this gap please? It’s wider (~2.5 cm) on top and tapers to around 1 cm at the bottom. Someone advised aluminiu ...
Hi All.
I was inspired by this Custom Industrial Table by @ogosh for my outdoor / backyard deck.
Contrary to @ogosh situation, I could not ...
I can’t get someone to put gutter downpipes to my raintanks, or the taps and overflows, so I have to try and do them. (I’m at Curramulka Yorke Peninsu ...
Hi,I am a very competent DIYer and am going to be doing a carport conversion, framing walls and completely enclosing the carport which currently has a ...
Hi Guys, I am planning to build a dining table. I am very new to wood working and this is my first project ever. I have done some research and have pl ...
Hi, Lately i have seen this fast growing weed (grass?), growing in the lawn. Please advise how i can kill them.
I have a flat colourbond verandah and the two verandah posts on one side are 5.7 metres apart. The verandah sits on the fence line. I want to install ...
What can I use to fill the gap between the sliding door and floor?
Hi everyone. I’ve recently purchased a house and the walls are cracked throughout. It looks like steele is exposed??? Is this just a standard plas ...
I've unscrewed the actual connection, but not sure how to get the rest off.
Hi I’ve been removing some tiles from external stairs and found that some of the concrete stairs need repair. What should I use to fill the holes in t ...
Hi I had damage occur to a bedroom wall as some water came through a window. The window has now been fixed so I’d like to restore the wall. The water ...
Hi - we recently bought a single brick house about 35 years old. Each built in wardrobe and cupboard has large gaps on the inside between the gyprock ...
I hope everyone is having a nice weekend. I had a plumber out yesterday who needed to do a jet blast of the pipes as I had issues with the toilet / gu ...
Loose arm on rocking chair. Tried to repair with liquid nails but it hasn't worked. Please see photos and advise
After further research and helpful input from you guys i am now planning to build an approximately 3m x 3m deck (no pergola) over a slightly sloping c ...
Hi team, was just wanting some advice/solutions to fixing my deck edging against my pool. Not sure if it was bad workmenship from the people who insta ...
Good afternoon Everyone, I am relatively new to wood working and am acquiring macjines and tools as I progress and
I am at the stage now where I'd li ...
Hey guys, I am planning to build some backdoor steps, the platform is 800mm in height and i plan to use 2x Peak Black 4 Tread Steel Stair Stringer, ...
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects