I need to replace the track on the patio / house sliding glass door. The miracle track seems to be the choice, but, all the advice says use metal bog ...
Hi,
We bought our house 2 years ago and at the time our handyman patched most cracks and holes around the house. Some of the settlement cracks have ...
Hello, I’ve only just joined…
we purchased the Arlec outdoor sensor light that has the grid connect application
so far I have had to reset re config ...
Hi. I've a tin roof over the kitchen and dining room (almost flat, maybe 5% slope) and its not insulated and gets pretty hot first thing in the mornin ...
I have a child gate near the entrance of the front door small hallway my amstaff kept jumping on the gate and has made the screw hole bigger than the ...
Hi,first post.
I recently bought some black rubber floor protector cups from Bunnings (38ml i think) for our dining room chairs to protect the timbe ...
Hi all. Im now up to restoring colonial windows that with badly damaged timber. Where should i start? What type of putty is best for this situation? ...
Hi there,Unfortunately, yesterday I created a hole in the paint/render of an interior brick wall from a nerf dart. This was surprising to me as I thou ...
Good afternoon, Bunnings Community, My have interior window frames made of timber. I believe they have been finished with a varnish, which is starting ...
Hi all,
I thought it may he good to have a feed where we could share any tips and tricks to do with any of the Grid Connect Range being Arlec, Deta, V ...