Workshop
Start a discussion

The Bunnings Workshop community can help with your home improvement projects.

Garage and Shed

Lottle87
Budding Browser
1 reply

Hello all, I've recently collected a bunch of pallets from bunnings stores around my area to reuse and make furniture with. I've heard plenty about Me ...

Salini
Newbie
202 replies

Hi, I am looking for free pallets. I live in Sydney Inner West (Strathfield South). Thanks

fiddlerdan
New Contributor
3 replies

Chladni plates refer to a vibrating plate onto which fine particles like tea, sand or salt are placed. The plate is then vibrated by a speaker directl ...

tubebender
New Contributor
5 replies

I’m told by the maritime museum that the wheel is approximately 200 years old but the previous owner painted it with lead paint and my thoughts are th ...

misszara
Budding Browser
1 reply

I did this project entirely solo (minus light installation) to prove to myself that I could do it. The bench is the original bench and vice from what ...

peterh450
Frequent Browser
1 reply

Somewhere comfortable to sit and enjoy the sun. Recycled pallets stained with teak deck oil.

Sugar
Experienced Contributor
1 reply
May

Hi guys I got this piece of furniture from FB marketplace for free. I picked up this thinking that I could give a new life to this. Turns out that my ...

mb_580
New Contributor
12 replies

Hi everyone, happy new year to all, I made a workbench to organising my tools and clean-up my garage during last week (first week of holiday). I thou ...

cindyh68
Budding Contributor
4 replies

 Completed Shed 3x3m upcycled project  Before: tin roof structure over old unused child's sandpit. The coppers logs were replaced with square tim ...

Pklebano
Budding Contributor
7 replies

Following on with the racing themeFully finished with the tie down points addedThe side rails increase stiffness and hold the edge of the vinylA coat ...

Tricia2002
Budding Contributor
12 replies

Hi, I have an Absco Standard Bike Shed 3.00m x 1.52m x 2.08m and I'm looking at getting a cheap flooring for the bike shed? Can wooden pallets work, i ...

JustJim
Established Contributor
1 reply

Some years ago I bought a set of spade bits. The 16mm one was bent in the shaft straight out of the box. It was un-useable but I never threw it away. ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects