Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Garage and Shed

Help for garage and shed projects
Razzer
Having an Impact
8 replies

Thought I would put this up. Here is a mobile workbench I built for the garage. It's 1840mm long X 660mm wide and 860mm high. It's made all out of 18m ...

phil77
Finding My Feet
6 replies

Hi there, I'm looking for a suitable material to use as the top of a workbench in my shed. Am considering using a sheet of 19mm Yellow tongue floo ...

celt
Getting Established
7 replies

Hello everyone I’ve been given a kitchen workbench but the top is water damaged. I want to replace this with a sturdy worktop to use as a workbench i ...

New2Retirement
Getting Established
5 replies

Hello all, I have a large brick wall area above the workbench in my garage that is in desperate need for a facelift. The existing shelving has been ad ...

DIY4Knuckleheds
Making a Splash
2 replies

My old workbench, as good as it's been over the past 12 years needed a revamp which was the inspiration for this project. I wanted a workbench that in ...

alexbutcher
Finding My Feet
1 reply

I wanted a workbench to fit in the garage to a specific spot which nothing I could find would suit. Solution: Build one. The bench allows storage und ...

mrpatel
Cultivating a Following
2 replies
May

After alot of prep work, finally got my pegboards fitted in my garage. The garage is part brick part barn. Had to do a fair bit of work to frame up an ...

kirby_n
Just Starting Out
1 reply
May

   hi! I’m building a mudroom in the garage using flexistorage from Bunnings. The cubes however I thought would be tall enough to go above the powe ...

RK07
Cultivating a Following
3 replies
May

I need help securely attaching four IKEA PAX cabinets to a plasterboard wall that has skirtings at the bottom. I damaged the MDF while fixing th ...

Jaguar-XF
Just Starting Out
1 reply
May

I recently had a shed built, I built it up put all my tools and garden equipment in one space.it is about 2.8 metres high made of Colorbond. Just wan ...

jk1234
Just Starting Out
1 reply
May

Can you advise which products I should use to safely anchor a Rack-It 1000KG & PRO open shelving system to a masonry brick wall in a garage? The produ ...

mountaineer
Finding My Feet
3 replies

Hi What would be a good cost effective workshop bench top? One that can be sacrificed and replaced. When replaced one that can be easily recycled. I ...

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects