I want to cut an opening at the bottom of the NBN box so that I can run the cables neatly. Since it’s a metal box, I am not sure which is the right to ...
Hi agsin , I’ve attempted to paint my living room ceiling. I bought a good quality dulux paint with a primer but I have ended up with roller marks eve ...
Hey there,
The situation is this: my partner and I have begun painting our apartment walls which includes the door frames. The door frames are made ...
Hi all,
Have 4 types of cracks that I am wanting to repair in my home all in plaster whilst I paint my house. The house is 25 years old and these cr ...
I have stripped back and sanded a few pieces of timber furniture. I am wanting to keep the raw timber finish/colour. I bought Bunnings soft wax (clear ...
Planning to do below table for speakers with steel wiremesh door.
Anyone did stainless steel wiremesh door for speaker table , will it affect the soun ...
Looking for help...
This was my grandfathers, at the railway in Queensland Australia, in the 1940/1960.. Not sure what he used it for.. If anyone can ...
I am wondering if I can install the Prempanel Acoustic paneling behind my new Scabdia Edge 50 wood burner, as long as I leave the required 350mm gap, ...
Hi- Theres a chip out of the inside rim of my nice Indoor ceramic planter. The missing piece is shallow, and about 2cm x 3 cm. I think I could build i ...
Many thanks for joining the Bunnings Workshop community. You have joined a friendly, helpful community of people who are happy to roll the sleeves up ...
My wife and I started this project and it took us 2 weeks to finish (due to commitment towards our full time job and of course kid too). We both are v ...
I had a lockable window winder that needed to be replaced. The issue was that it was stuck in the closed position. Which meant I couldn't unwind the c ...